Related Manuals for Black & Decker Powerful Solutions GT5025
Summary of Contents for Black & Decker Powerful Solutions GT5025
- Page 1 Powerful Solutions GT5026 GT6025 GT6026 GT6030 GT6530 GT7026 GT7030 www.blackanddecker.co.uk...
- Page 2 English (Original instructions)
-
Page 4: Intended Use
Intended use If operating a power tool in a damp location is unavoidable, use a Residual Current Device (RCD) Your Black & Decker hedge trimmer has been designed for protected supply. Use of an RCD reduces the risk of trimming hedges, shrubs and brambles. This tool is intended electric shock. - Page 5 d. Store idle power tools out of the reach of children This tool is not intended for use by persons (including and do not allow persons unfamiliar with the power children) with reduced physical, sensory or mental tool or these instructions to operate the power tool. capabilities, or lack of experience and knowledge, Power tools are dangerous in the hands of untrained unless they have been given supervision or instruction...
- Page 6 Vibration Using an extension cable The declared vibration emission values stated in the Always use an approved extension cable suitable for the technical data and the declaration of conformity have been power input of this tool (see technical data). The extension measured in accordance with a standard test method cable must be suitable for outdoor use and marked provided by EN 60745 and may be used for comparing one...
-
Page 7: Maintenance
Loop the cable through the cable restraint (11) as Switching on and off shown to prevent the extension cable from becoming Switching on detached during use. Take hold of the front handle (1) with one hand so that the Insert the mains plug into a mains outlet. -
Page 8: Protecting The Environment
Protecting the environment After use, carefully clean the blades. After cleaning, apply a film of light machine oil to prevent the blades from rusting. Regularly clean the ventilation slots in your tool using a soft dry brush or dry cloth. Separate collection. -
Page 9: Ec Declaration Of Conformity
EC declaration of conformity If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 MACHINERY DIRECTIVE months from the date of purchase, Black & Decker OUTDOOR NOISE DIRECTIVE guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to make sure of the minimum inconvenience to the customer unless:... - Page 11 ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
- Page 12 90558533 REV 0 L-1 1/09...