Table of Contents
Advertisement
Operating Instructions
Connect the heater into the power supply. The two power selector switches on the
control panel provide a choice of half or full heat output to suit varying conditions and
for economy of operation.
1. The upper switch turned on provides approximately half the heat output of the
heater.
2. Both the upper and centre switch provides full heat output.
3. The bottom switch selects the fan boost function (Does not apply to OC2411T).
When it is switched the heater cuts back to one heat setting plus 400W turbo fan
output.
Thermostat Control
Turn the thermostat knob fully clockwise to its highest position for maximum heat
output to warn the room rapidly. When the room temperature has reached the
desired level, turn the thermostat knob back slowly until the thermostat clicks off and
the neon light goes out. The heater will then operate under the control of the
thermostat to maintain the chosen temperature level, provided that the heater is of
sufficient size for the room to be heated.
Humidifying Cup
The use of the humidifying cup is optional. To use the humidifying cup you will need
to fill it with clean water and place the plastic cup over the fins at the top of the
heater. The water will evaporate slowly during the heating process to place moisture
into the warm air.
WARNING: The plastic cup and water will become hot during use so you will
need to wait for it to cool before removing. Ensure that the heater is out of the
reach of small children and observe all other safety precautions.
5
omega altise
Hide quick links:
Advertisement
Table of Contents
