LED Cover: Dell Precision M6400 Service Manual
Back to Contents Page
LED Cover
Dell Precision™ M6400 Service Manual
Removing the LED Cover
Replacing the LED Cover
Removing the LED Cover
CAUTION:
Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage on
www.dell.com at: www.dell.com/regulatory_compliance.
1. Follow the procedures in
2. Starting on the left, gently lift the LED cover and disconnect the power cable and the biometer cable if present.
1 LED cover
2 power cable
3 biometer cable
Replacing the LED Cover
CAUTION:
Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage on
www.dell.com at: www.dell.com/regulatory_compliance.
3. Connect the power cable and, if present, the biometer cable to the LED cover.
4. Starting with the right, snap the LED cover into place.
5. Follow the procedures in
file:///T|/htdocs/systems/wsm6400/en/sm/ledcvr.htm[11/16/2012 10:26:45 AM]
Before Working on Your
Computer.
After Working on Your
Computer.