Advertisement
Quick Links
X12 Array
Active column array & sub speaker system
M A N U A L
V E R S I O N
1 . 0
1 6 - 0 4 - 1 2
Due to continuous product development, please ensure that you have downloaded
the latest instruction manual for this product from the Kam website at www.kam.co.uk
For the latest updates and information on the entire Kam range visit:
www.kam.co.uk
Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com
Due to continuous product development, specifications and appearance are subject to change. © Copyright Lamba plc 2012. E&OE.
M
A
D
E
I
N
C
H
I
N
A
Advertisement
Summary of Contents for KAM X12 Array
- Page 1 For the latest updates and information on the entire Kam range visit: www.kam.co.uk Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com...
- Page 2 Thank you for purchasing this Kam product, we are sure that it will serve you for many years to come. To optimise the performance of this product, please read these operating instructions carefully to familiarise yourself with the basic operations of this unit. Please retain them for future reference.This unit has been tested at the factory before being shipped to you.
- Page 3 Linking multiple Kam X12 Array systems To link multiple X12 Array systems to each other, connect the audio output (9) of the first speaker (the system to which the audio input is connected) to the audio input of the next X12 Array system. This audio signal is not amplified and therefore you can adjust the volume of this second system to match the first or set it’s own level.
- Page 4 Technical specification Kam X12 Array 850w RMS active column array & sub speaker system Column array speaker Power: 250w RMS Tweeter: 4 x 1 inch dome Mid range drivers: 4 x 4 inch Impedance: 8 Ohms Crossover frequency: 150Hz Coverage angle: vertical - 90° / horizontal - 180°...