Table of Contents
Advertisement
Random Assemble Editing
Using the remote control, you can use P.AE/Effects and make an original edited tape.
To EDIT connector
To S-VIDEO OUT connector
1
MAKE CONNECTIONS
Make sure that the playback picture and sound
are available on the connected TV (
57).
•Connections should be made while the power
is off. Making connections with the power on
can lead to electrical shock or malfunctions.
2
START SOURCE PLAYBACK
First turn the Power Dial to "PLAY" while
pressing down the lock button located on the
dial. Press PLAY and then press R.A. EDIT ON/
OFF on the remote control. Make sure to point
the remote control at the camcorder's remote
sensor.
•The Random Assemble Editing Menu appears
on the TV screen or the LCD monitor.
3
EXECUTE FADE/WIPE IN
(IF NECESSARY)
Press FADE/WIPE on the remote control.
•Cycle through the effects by pressing
repeatedly, and stop when the one you want
is displayed.
•You can't use a Picture Wipe/Dissolve at the
beginning of Program 1.
Core
filter
VIDEO/
AUDIO cable
(provided)
Red to AUDIO R
White to AUDIO L
Core
filter
Yellow to VIDEO
Core
filter
Remote sensor
Source tape
(Camcorder)
New tape
(VCR)
pg. 56,
Editing cable
To remote
(provided)
pause
connecter
White to AUDIO L
Red to AUDIO R
Yellow to VIDEO
S-VIDEO cable
(provided)
VIDEO OUT
select switch
(Y/C or CVBS)
NOTES:
When using a JVC VCR with a remote pause
terminal, connect the EDIT connector on the AC
Charger Station to the VCR's remote pause terminal
using an editing cable.
If you use a JVC VCR not equipped with a remote
pause terminal or a non-JVC VCR, connect the AC
Charger Station's EDIT connector to the remote
control's remote pause connector using an editing
cable.
Set the VIDEO OUT select switch of the cable
adapter as required:
Y/C: When connecting to a TV or VCR which accepts
Y/C signals and uses an S-VIDEO cable.
CVBS: When connecting to a TV or VCR which does
not accept Y/C signals and uses an audio/video cable.
Before Random Assemble Editing, make sure the
indications don't appear on the TV monitor. If they
appear during Random Assemble Editing, they will
be recorded onto the new tape. To clear the Playback
Sound Mode Display, press DISPLAY on the remote
control. Select "DISPLAY" and "TIME CODE" from
the Playback Menu (
Date/Time and the Time Code on the recording. To
show or hide all indications except for the Random
Assemble Editing Menu, press IND. ON/OFF on the
camcorder for longer than 1 second. When Random
Assemble Editing starts, its indications disappear and
are not recorded on the new tape.
EN
DISPLAY
T
W
PLAY
FADE/WIPE
R.A. EDIT
ON/OFF
VCR
(Recording deck)
Cable adapter (provided)
If your VCR has the 21-
pin AV input connector
(SCART), use the provided
cable adapter.
pg. 52) to show or hide the
CONTINUED ON NEXT PAGE
63
Advertisement
Table of Contents
