07/09/12 09:51:47 32SAA650_319
Wiper Blades
To replace the rear wiper blade:
1.
Raise the wiper arm off the
windscreen.
2.
Pull one end of the blade out from
the holder.
3.
Slide the blade out of the holder.
316
Maintenance
BLADE
REINFORCEMENT
Examine the new wiper blade. If it
4.
has no plastic or metal rein-
forcement along the back edge,
remove the metal reinforcement
strips from the old wiper blade and
install them in the slots along the
edge of the new blade.
5.
Slide the new blade into the holder.
Make sure it is engaged in the slot
along its full length.
Insert both ends of the blade into
6.
the holder. Make sure they are
secure.
7.
Lower the wiper arm.