JVC GR-SXM520 Instructions Manual page 25

Menu Screen Available Using The MENU Button (cont.)
S-VHS* ON
(S-VHS ET*)
OFF
Allows you to set the tape length depending on the tape used (
TAPE LENGTH
REC TIME Refer to "Animation" and "Time-Lapse" (
Refer to "Time-Lapse" (
INT. TIME
TITLE LANG.
Allows you to select the language (ENGLISH, FRENCH, SPANISH or PORTUGUESE)
of Instant Titles (
Allows you to set the current date and time (
DATE/TIME
JLIP ID NO. This number is necessary when connecting the camcorder to a device such as a computer
using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.
DEMO MODE
ON
OFF
*S-VHS ET is displayed when a VHS cassette is loaded, and S-VHS is displayed when an S-VHS cassette is
loaded ( pg. 13). If a cassette is not loaded, "S-VHS" will be displayed in the Menu Screen.
S-VHS ET is preset to "OFF".
: Factory-preset
Records in S-VHS on a VHS or S-VHS cassette (
Records in VHS on a VHS or S-VHS cassette (
pg. 27).
pg. 26).
Demonstrates certain functions such as Fade/Wipe, etc. When
"DEMO MODE" is set to "ON" and the Menu Screen is closed,
the demonstration starts.
Operating the Power Zoom Lever during the demonstration
stops the demonstration temporarily. If the Power Zoom Lever is
not moved for more than 1 minute after that, the demonstration
will resume.
NOTE:
When a tape whose Erase Protection tab is in the position that
allows recording is loaded in the camcorder, demonstration is
not available.
Automatic demonstration will not take place.
pg. 12).
pg. 27).
pg. 11).
25
EN
pg. 13).
pg. 13).