Parts Supplied; Installation Using The Screw Holes On The Side Of This Product - Pioneer AVIC-F60BT Installation Manual

Section
03 Installation

Parts supplied

This product
Frame
Installation using the screw
holes on the side of this product
% Fastening this product to the factory
radio-mounting bracket.
Position this product so that its screw holes
are aligned with the screw holes of the brack-
et, and tighten the screws at three locations
on each side.
22
Engb
Truss head screw
(5 mm × 8 mm)
(6 pcs.)
If the pawl interferes with installation,
you may bend it down out of the way.
4
3
1 Factory radio-mounting bracket
2 Dashboard or console
3 Frame
In some types of vehicles, discrepancy may
occur between the unit and the dashboard.
If this happens, use the supplied frame to
fill the gap.
4 Truss head screw
Be sure to use the screws supplied with
this product.
1
2