Honda 2010 Civic Sedan Owner's Manual page 309

Lights
BULBS
3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
5. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
306
SOCKETS
BULB
6. Test the lights to make sure the
new bulb is working.
7. Reinstall the trunk lining. Make
sure it is installed under the edge
of the trunk seal.
8. Put the fasteners into the holes on
the side of the trunk lining.
Reinstall the screws.
I n f o r ma t i o n P r o v i d e d b y :
Replacing Rear Bulbs
(in Trunk Lid)
BULB
SOCKETS
FASTENERS
1. Open the trunk.
2.
On all EX-L, Canadian Sport, and Si
models
Remove the screw from the center
of each fastener on the trunk lid
trim. Pull the trim back.