Unpacking The System Unit - Fujitsu Primergy BX900 S2 Operating Manual

Hardware installation
5.1

Unpacking the system unit

V
CAUTION!
Make sure you observe the safety notes in chapter
information" on page
The system unit must always be lifted or carried by at least three people.
(For the Japanese market, please refer to " 安全上のご注意 ").
Only unpack the system unit at the place where you want to set it up.
Ê Unpack all the individual parts.
Keep the original packaging of the system unit, as you may need it for future
transport (applies only to EMEA market).
Ê Check the delivery for any damage during transport.
Ê Check whether the items delivered match the details on the delivery note.
The product name and serial number of the product can be found on the ID card
(see section "ID card" on page
Ê If the delivery is damaged or does not match the delivery note, contact your
supplier immediately!
48
35.
72).
Operating Manual
"Important
BX900S2