Integrator Mode
7) SUB VOLUME Setting
This item is for adjusting the audio input level for each input.
This is useful when adjusting the level between different sources (for example a DVD player and a PC).
After muting the audio before hand, enter the integrator mode and perform adjustment.
1 Enter the integrator mode.
(Refer to section 5.4.1, "About the Integrator Mode (pg. 134)".)
Select 'SET UP'.
2 Place the cursor on 'SUB VOLUME', and press the [SET]
button.
3 Perform adjustment.
Perform adjustment using the [2/3] buttons on the
remote control or main-control panel.
Press the [SET] button to return to screen 2.
<Adjustable Range>
Each item: 0 to 20 (initial value: 20)
<Adjustment Order>
Performing adjustment in the following order is effective.
1. VOLUME (normal-operation mode): Raise the volume to the actual operating condition.
2. SUB VOLUME (integrator mode): Adjust the input with high volume to match the input with low volume.
142
Screen 2
I N T E G R AT O R
P I C T U R E
S C R E E N
B R T. E N H A N C E
S U B V O L U M E
ENTER
SET
Screen 3
S U B V O L U M E
SET
SET
I N P U T 1
S E T U P
O P T I O N
:
O F F
:
2 0
EXIT
MENU
:
2 0
EXIT
MENU