1. Manuals
  2. Brands
  3. Casio Manuals
  4. Watch
  5. 5061
  6. Manual

Casio 5061 Manual

Hide thumbs Also See for 5061:
Table of Contents

Advertisement

Quick Links

See also: Operating Manual
MA0812-EA
Module No. 5061

Advertisement

Table of Contents
loading

Related Manuals for Casio 5061

Summary of Contents for Casio 5061

  • Page 1 MA0812-EA Module No. 5061...
  • Page 2 Because of this, the radio-controlled atomic timekeeping function will not display the correct time for Newfoundland, Canada. Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss suffered by you or any third party arising through the use of this product or...

  • Page 3: About This Manual

    About This Manual Button operations are indicated using the letters A through D shown in the illustration. Hand Functions z z Hour Hand x x Second Hand c c Minute Hand v v Left Dial Hand: Indicates the current mode. b b Lower Dial Hand n n Right Dial Hands: Indicate a time, in 24-hour format, depending on the current mode.

  • Page 4: Things To Check Before Using The Watch

    Things to check before using the watch 1. Hold down C for about two seconds to enter the Timekeeping Mode, and then observe the movement of the x Second Hand. Is the x Second Hand moving smoothly in one-second steps? Is the x Second Hand jumping every two The watch is charged suffi...
  • Page 5 2. Check the Home City and the daylight saving time (DST) setting. Use the procedure under “To confi gure Home City settings” (page E-34) to confi gure your Home City and daylight saving time settings. Important! Proper time calibration signal reception and World Time settings depend on correct Home City, time, and date settings in the Timekeeping Mode.
  • Page 6 The watch is now ready for use. • For details about the watch’s radio controlled timekeeping feature, see “Radio Controlled Atomic Timekeeping” (page E-18).

  • Page 7: Table Of Contents

    Contents About This Manual Things to check before using the watch E-10 Charging the Watch E-17 To recover from the sleep state E-18 Radio Controlled Atomic Timekeeping E-23 To get ready for a receive operation E-26 To perform manual receive E-28 To check the result of the latest receive operation E-30 Mode Reference Guide...
  • Page 8 E-33 Timekeeping E-34 Confi guring Home City Settings E-34 To confi gure Home City settings E-36 To toggle the Home City time between standard time and daylight saving time E-38 Confi guring Current Time and Date Settings Manually E-38 To change the current time setting manually E-41 To change the current date setting manually E-44 Using the Stopwatch...
  • Page 9 E-47 Using the Countdown Timer E-48 To specify the countdown start time E-49 To perform a countdown timer operation E-50 To stop the alarm E-51 Checking the Current Time in a Different Time Zone E-52 To view the time in another time zone E-53 To specify standard time or daylight saving time (DST) for a city E-54...
  • Page 10 E-63 Troubleshooting E-72 Specifi cations E-74 Operating Precautions E-83 User Maintenance...

  • Page 11: Charging The Watch

    Charging the Watch The face of the watch is a solar cell that generates power from light. The generated power charges a built-in rechargeable battery, which powers watch operations. The watch charges whenever it is exposed to light. Charging Guide Whenever you are not When wearing the watch, wearing the watch, be sure...
  • Page 12 Warning! Leaving the watch in bright light for charging can cause it to become quite hot. Take care when handling the watch to avoid burn injury. The watch can become particularly hot when exposed to the following conditions for long periods. •...
  • Page 13 Power Levels You can get an idea of the watch’s power level by observing the movement of the x Second Hand in the Timekeeping Mode. • x Second Hand is moving normally in one-second If the steps, power is at Level 1. •...
  • Page 14 Level Hand Movement Function Status Normal. All functions enabled. Beeper, time calibration signal x Second hand jumps in 2-second steps. reception, and countdown timer m Day changes to home position. operation disabled. x Second hand stopped. z z Hour and c Minute hands stopped at All functions disabled.
  • Page 15 Power Recovery Mode The watch is designed to go into a power recovery mode that stops hand operation temporarily whenever power suddenly drops below a certain level due to overuse of the alarm tone over a short period. Note that all operations are disabled while the watch is in the power recovery mode.
  • Page 16 Charging Times Level Change *2 Daily Level 3 Level 2 Level 1 Exposure Level (Brightness) Operation Outdoor sunlight (50,000 lux) 8 min. 2 hours 23 hours Sunlight through a window (10,000 lux) 30 min. 6 hours 85 hours Daylight through a window on a cloudy 48 min.
  • Page 17 • For details about the operating time and daily operating conditions, see the “Power Supply” section of the Specifi cations (page E-73). Power Saving Power Saving enters a sleep state automatically whenever the watch is left for a certain period in an area where it is dark. The table below shows how watch functions are affected by Power Saving.

  • Page 18: To Recover From The Sleep State

    • The watch will not enter a sleep state while it is in the Stopwatch Mode or Countdown Timer Mode. To recover from the sleep state Move the watch to a well-lit area or press any button. E-17...

  • Page 19: Radio Controlled Atomic Timekeeping

    Radio Controlled Atomic Timekeeping This watch receives a time calibration signal and updates its time setting accordingly. However, when using the watch outside of areas covered by time calibration signals, you will have to adjust the settings manually as required. See “Confi guring Current Time and Date Settings Manually”...
  • Page 20 Important! • The areas covered by HONOLULU and ANCHORAGE are quite far from the calibration signal transmitters, so certain conditions may cause reception problems. • When HONOLULU or HONG KONG is selected as the Home City, only the time and date are adjusted according to the time calibration signal. You need to switch manually between standard time and daylight saving time (DST) if required.
  • Page 21 Approximate Reception Ranges UK and German Signals North American Signal 2,000 miles (3,000 kilometers) Anthorn 600 miles (1,000 kilometers) 500 kilometers Fort Collins 1,500 kilometers Mainfl ingen The Anthorn signal is receivable within this area. E-20...
  • Page 22 Japanese Signal Chinese Signal Fukushima 500 kilometers Changchun Beijing 500 kilometers Shangqiu Shanghai Fukuoka/Saga Chengdu Hong Kong 1,500 kilometers 1,000 kilometers E-21...
  • Page 23 • Even when the watch is within range of a transmitter, signal reception may be impossible due to the effects of geographic contours, structures, weather, the time of year, the time of day, radio interference, etc. The signal becomes weaker at distances of approximately 500 kilometers, which means that the infl...

  • Page 24: To Get Ready For A Receive Operation

    To get ready for a receive operation C for Confi rm that the watch is in the Timekeeping Mode. If it isn’t, hold down about two seconds to enter the Timekeeping Mode. Place the watch in a location where signal reception is good. •...
  • Page 25 • Signal reception may be diffi cult or even impossible under the conditions described below. Inside or Inside a Near Near a Near Among among vehicle household construction high-tension or behind buildings appliances, site, airport, power lines mountains offi ce or other equipment, sources of...
  • Page 26 What you should do next depends on whether you are using Auto Receive or Manual Receive. • Auto Receive: Leave the watch over night in the location you selected in step 2. See “Auto Receive” on page E-25 for details. •...

  • Page 27: To Perform Manual Receive

    To perform manual receive A depressed (for about two seconds) as the In the Timekeeping Mode, keep x Second Hand goes through the following sequence. • Moves to the last signal reception result ( Y or N), then to READY (or R for some models).
  • Page 28 x Second The receive operation is complete when the Hand moves to YES (Y) or NO (N) for about fi ve seconds, and then resumes normal timekeeping. • When the receive operation is successful, the watch adjusts the time setting accordingly. It does not adjust the setting if the operation failed.

  • Page 29: To Check The Result Of The Latest Receive Operation

    To check the result of the latest receive operation In the Timekeeping Mode, press A. • x Second Hand will move to YES (Y) for fi ve seconds if the latest receive operation was successful, or NO (N) if it was not. After that, normal timekeeping will resume.
  • Page 30 Radio-controlled Atomic Timekeeping Precautions • Strong electrostatic charge can result in the wrong time setting. • Even if a receive operation is successful, certain conditions can cause the time setting to be off by up to one second. • The watch is designed to update the date and day of the week automatically for the period January 1, 2000 to December 31, 2099.

  • Page 31: Mode Reference Guide

    Mode Reference Guide Your watch has fi ve “modes”. The mode you should select depends on what you want to do. To do this: Enter this mode: See: • View the current date in the Home City • Confi gure Home City and daylight saving time (DST) settings Timekeeping Mode E-33...

  • Page 32: To Determine The Watch's Current Mode

    Selecting a Mode With this watch, everything starts from the Timekeeping Mode. To determine the watch’s current mode Check the position of the v Left Dial Hand as shown under “To select a mode” (page E-32). To return to the Timekeeping Mode from any other mode Hold down C for about two seconds until the watch beeps twice.

  • Page 33: To Select A Mode

    To select a mode Press C to cycle between the modes as shown below. The v Left Dial Hand indicates the currently selected mode. Timekeeping Mode Stopwatch Mode The hand indicates The hand points to the day of the week (at 12 o’clock).

  • Page 34: Timekeeping

    Timekeeping Use the Timekeeping Mode to view the current time and date. To enter the Timekeeping Mode from any other mode, hold down C for about two seconds. Hand Functions z z Hour Hand x x Second Hand c c Minute Hand v v Left Dial Hand: Indicates the day of the week.

  • Page 35: Confi Guring Home City Settings

    Confi guring Home City Settings There are two Home City settings: actually selecting the Home City and selecting either standard time or daylight saving time (DST). To confi gure Home City settings Note • This watch does not have a city code that corresponds to Newfoundland.
  • Page 36 • The watch will exit the setting mode automatically if you do not perform any operation for about two or three minutes. • For details about city codes, see the “City Code Table” at the back of this manual. D to move the To change the Home City setting, press x Second Hand clockwise.

  • Page 37: To Toggle The Home City Time Between Standard Time And Daylight Saving Time

    • Note that you cannot switch between STD (standard time)/DST (daylight saving time) while UTC is selected as your Home City. A to return to the Timekeeping After all the settings are the way you want, press Mode. To toggle the Home City time between standard time and daylight saving time Perform the step 1 under “To confi...
  • Page 38 A to return to the Timekeeping After all the settings are the way you want, press Mode. Note • After you specify a city code, the watch will use UTC* offsets in the World Time Mode to calculate the current time for other time zones based on the current time in your Home City.

  • Page 39: Confi Guring Current Time And Date Settings Manually

    Confi guring Current Time and Date Settings Manually You can confi gure current time and date settings manually when the watch is unable to receive a time calibration signal. To change the current time setting manually A depressed (for about In the Timekeeping Mode, keep fi...
  • Page 40 Change the Home City and daylight saving time (DST) settings, if you want. • For details about these settings, see steps 2 and 3 under “To confi gure Home City settings” (page E-34). • C cycles In the following steps, each press of between settings as shown below.
  • Page 41 D (+) and B (–) to change the time (hour and minute) setting. • z Hour Hand and c Minute Each press of either button will move the hands ( Hand) to one minute. • D or B will start high-speed z Hour Hand and c Minute Hand Holding down movement in the applicable direction.

  • Page 42: To Change The Current Date Setting Manually

    To change the current date setting manually A depressed (for In the Timekeeping Mode, keep about fi ve seconds) as the x Second Hand goes through the following sequence. • Moves to the last signal reception result ( Y or N), then to READY (or R for some models), and then to the city code of the currently selected Home City.
  • Page 43 • D will move the x Second Hand Each press of and change the ones digit of the year setting. After the year setting is the way you want, press • The watch will beep and change to the month setting mode.
  • Page 44 D (+) and B (–) to change the m Day setting. • If you want to change the time setting at this time, press C and then perform the procedure starting from step 3 under “To change the current time setting manually”...

  • Page 45: Using The Stopwatch

    Using the Stopwatch The stopwatch measures elapsed time and split times. Hand Functions x x Second Hand: Indicates the stopwatch seconds count. v v Left Dial Hand: Indicates the stopwatch 1/20-second count. n n Right Dial Hands: Indicate the stopwatch hours and minutes.

  • Page 46: To Perform Elapsed Time Measurement

    To perform elapsed time measurement C to move the v Left Dial Hand to Now you can perform either of following stopwatch operations. To perform an elapsed time operation Start Stop (Restart) (Stop) Reset To pause at a split time Normal stopwatch hand movement will resume automatically after fi...
  • Page 47 Note • The Stopwatch Mode can indicate elapsed time up to 23 hours, 59 minutes, 59.95 seconds. • D button operation (split, reset) is disabled while hands are moving at high speed following a reset operation and when transitioning from a split time back to normal elapsed timekeeping.

  • Page 48: Using The Countdown Timer

    Using the Countdown Timer The countdown timer can be confi gured to start automatically at a preset time, and sound an alarm when the end of the countdown is reached. Hand Functions x x Second Hand: Moves counter-clockwise to countdown the seconds. Automatically switches to clockwise movement after the end of the countdown is reached to count up the seconds of the elapsed time operation.

  • Page 49: To Specify The Countdown Start Time

    To specify the countdown start time C to move the v Left Dial Hand to TR. x Second Hand is stopped (which indicates there is no After confi rming that the ongoing countdown timer operation), press D. • x Second Hand is moving, press B to stop it and then press D. If the D (+) and A (–) to specify the countdown start time.

  • Page 50: To Perform A Countdown Timer Operation

    To perform a countdown timer operation Start Stop (Restart) (Stop) Reset • Before starting a countdown timer operation, check to make sure that the countdown timer is not already operating (indicated by a moving x Second Hand). If it is, press B to stop it and then D to reset to the countdown start time. •...

  • Page 51: To Stop The Alarm

    To stop the alarm Press any button. Note • Pressing any button while the alarm is sounding simply stops the alarm sound. It does not stop the elapsed time operation that started when the end of the countdown was reached. To stop the elapsed time operation, press B. E-50...

  • Page 52: Checking The Current Time In A Different Time Zone

    Checking the Current Time in a Different Time Zone You can use the World Time Mode to view the current time in one of 29 time zones around the globe. The city that is currently selected in the World Time Mode is called the “World Time City”.

  • Page 53: To View The Time In Another Time Zone

    To view the time in another time zone C to move the v Left Dial Hand to STD or DST. • x Second Hand will move to the city code of the currently selected World Time City. D to move the x Second Hand to the city code you want to select as the World Time City.

  • Page 54: To Specify Standard Time Or Daylight Saving Time (Dst) For A City

    To specify standard time or daylight saving time (DST) for a city D to select the city code In the World Time Mode, use whose setting you want to change. • n Right Dial Hands complete their Wait until the move to the time in the currently selected World Time City.

  • Page 55: To Swap Your Home City And World Time City

    Swapping your Home City and World Time City You can use the procedure below to swap your Home City and World Time City. This capability can come in handy when you frequently travel between two locations in different time zones. The following example shows what happens when the Home City and World Time City are swapped while the Home City originally is TOKYO and the World Time City is...
  • Page 56 • x Second Hand In this example, you would move the to NEW YORK in order to select New York as the World Time City. • n Right Dial Hands complete their Wait until the move to the time in the currently selected World Time City.
  • Page 57 • n Right Dial Hands will indicate the current time in your new World Time City. Note • If your current World Time City supports time calibration signal reception, making it your Home City enables calibration signal reception for that city. E-56...

  • Page 58: Using The Alarm

    Using the Alarm When the alarm is turned on, an alarm will sound for about 10 seconds each day when the time in the Timekeeping Mode reaches the preset alarm time. This is true even if the watch is not in the Timekeeping Mode. Hand Functions x x Second Hand: Indicates the current alarm ON/OFF setting.

  • Page 59: To Change The Alarm Time Setting

    To change the alarm time setting C to move the v Left Dial Hand to AL. D (+) and B (–) to change the alarm time setting. • n Right Dial Hands move one minute. Each press of either button will move the •...

  • Page 60: Adjusting The Home Positions

    Adjusting the Home Positions Strong magnetism or impact can cause the hands and/or date of the watch to be off, even if the watch is able to perform the signal receive operation. If this happens, perform the applicable home position adjustment procedures in this section. Note Any time after you enter the home position adjustment mode in step 1 of the following procedure, you can return to the Timekeeping Mode by pressing A.
  • Page 61 • The watch is now in the home position adjustment mode. • The watch will exit the adjustment mode automatically if you do not perform any operation for about two or three minutes. • x Second Hand home position adjustment. First is •...
  • Page 62 x Second Hand is at the proper home position, press C. After confi rming that the This will switch to z Hour Hand and c Minute Hand home position adjustment. • z Hour Hand and c Minute Hand are at their proper home positions if they both move to 12 o’clock.
  • Page 63 n Right Dial Hands are in the After confi rming that the correct home position, press C. This will advance to v Left Dial Hand home position adjustment. • v Left Dial Hand is in the correct home position if it is pointing at 12 o’clock.

  • Page 64: Troubleshooting

    Troubleshooting Hand Movement and Position ■ I lost track of what mode the watch is in. Refer to “To select a mode” (page E-32). To return directly to the Timekeeping Mode from any other mode, hold down C for about two seconds. ■...
  • Page 65 ■ The hands of the watch suddenly start moving at high speed, even when I do not perform any operation. This could be due to any one of the following causes. In all cases, the hand movement does not indicate malfunction, and should stop shortly. •...
  • Page 66 ■ The current time setting is off by hours. Your Home City setting may be wrong. Check your Home City setting and correct it, if necessary (page E-34). ■ The current time setting is off by one hour. If you are using the watch in an area where time calibration signal reception is possible, see “To confi...
  • Page 67 World Time Mode ■ The World Time indicated by the n Right Dial Hands in the World Time Mode is one hour off from the actual time in the selected time zone. The STD (standard time)/DST (daylight saving time) setting of the selected World Time City may be wrong.
  • Page 68 ■ The x Second Hand starts to move at one-second steps, but then suddenly returns to moving at two-second steps. The watch probably is not suffi ciently charged yet. Continue keeping it exposed to light. Time Calibration Signal The information in this section applies only when LONDON, PARIS, ATHENS, HONOLULU, ANCHORAGE, LOS ANGELES, DENVER, CHICAGO, NEW YORK, HONG KONG, or TOKYO is selected at the Home City.
  • Page 69 ■ The x Second Hand indicates NO (N) when I check the result of the latest receive operation. Possible Cause Remedy Page • You are wearing or moving the watch, or performing a button Keep the watch in an area where reception operation during the signal receive conditions are good while the signal receive E-23...
  • Page 70 ■ The current time setting changes after I set it manually. You may have the watch confi gured for Auto Receive of the time calibration signal (page E-25), which will cause the time to be adjusted automatically according to your currently selected Home City.
  • Page 71 ■ Auto Receive is not performed or I cannot perform Manual Receive. Possible Cause Remedy Page Auto Receive is not performed while the watch is in the Stopwatch Mode or The watch is in the Stopwatch Mode Countdown Timer Mode. Hold down E-31 or Countdown Timer Mode.
  • Page 72 ■ Signal reception is being performed successfully, but the time and/or day is wrong. Possible Cause Remedy Page Check your Home City setting and correct Your Home City setting is wrong. E-34 it, if necessary. The watch may have been exposed to magnetism or strong impact, which Adjust the watch’s hand and day home E-59...
  • Page 73 Specifi cations Accuracy at normal temperature: ± 15 seconds a month (with no signal calibration) Timekeeping: Hour, minutes (hand moves every 10 seconds), seconds, 24-hour, day, day of the week Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099 Other: Home City code (can be assigned one of 29 city codes and Coordinated Universal Time);...
  • Page 74 Stopwatch: Measuring capacity: 23:59'59.99" Measuring unit: 1/20 second Measuring mode: Elapsed time, split time Countdown Timer: Measuring unit: 1 second Input range: 1 minute to 24 hours (1-minute increments) Other: Auto switching to elapsed time measurement (1-second units) when the end of a countdown timer operation is reached World Time: 29 cities (29 time zones) and Coordinated Universal Time Other: Standard Time/Daylight Saving Time (summer time);...

  • Page 75: Operating Precautions

    Operating Precautions Water Resistance • The following applies to watches with WATER RESIST or WATER RESISTANT marked on the back cover. Enhanced Water Resistance Under Water Daily Use Resistance Under Daily Use Atmospheres Atmospheres Atmospheres On watch front or on Marking 5BAR 10BAR...
  • Page 76 A trained technician will know how to check your watch for proper water resistance whenever you have its battery replaced. Battery replacement requires the use of special tools. Always request battery replacement from your original retailer or from an authorized CASIO Service Center. E-75...
  • Page 77 • Some water-resistant watches come with fashionable leather bands. Avoid swimming, washing, or any other activity that causes direct exposure of a leather band to water. • The inside surface of the watch glass may fog when the watch is exposed to a sudden drop in temperature.
  • Page 78 Should you notice any breakage, discoloration, looseness or other problem with the band, immediately contact your original retailer or an authorized CASIO Service Center to have it checked, repaired, or replaced. Note that you will be charged for any repair or replacement of the band.
  • Page 79 Impact • Your watch is designed to withstand impact incurred during normal daily use and light activity such as playing catch, tennis, etc. Dropping the watch or otherwise subjecting it to strong impact, however, can lead to malfunction. Note that watches with shock-resistant designs (G-SHOCK, Baby-G, G-ms) can be worn while operating a chain saw or engaging in other activities that generate strong vibration, or while engage in strenuous sports activities (motocross, etc.).
  • Page 80 Chemicals • Do not allow the watch to come into contact with thinner, gasoline, solvents, oils, or fats, or with any cleaners, adhesives, paints, medicines, or cosmetics that contain such ingredients. Doing so can cause discoloration of or damage to the case, resin band, leather band, and other parts.
  • Page 81 Semi-transparent resin parts can become discolored due to sweat and dirt, and if exposed to high temperatures for long periods. • Contact an authorized CASIO Service Center to have resin components replaced. Note that you will be charged for replacement costs. Natural Leather and Imitation Leather Bands •...
  • Page 82 • Leaving a leather band where it is exposed to direct sunlight (ultraviolet rays) for long periods or failure to clean dirt from a leather band for long periods can cause it to become discolored. Important! • Subjecting a natural leather or imitation leather band to rubbing or dirt can cause color transfer and discoloration.
  • Page 83 Bacteria and Odor Resistant Band • The bacteria and odor resistant band protects against odor generated by the formation of bacteria from sweat, which ensures good comfort and hygiene. In order to ensure maximum bacteria and odor resistance, keep the band clean. Use an absorbent soft cloth to wipe the band clean of dirt, sweat, and moisture.

  • Page 84: User Maintenance

    Should your band become badly cracked or worn, be sure to have it replaced with a new one. Request band replacement from your original retailer or an authorized CASIO Service Center. Note that you will be charged for band replacement costs, even if your watch is still covered by its warranty.
  • Page 85 Dangers of Poor Watch Care Rust • Though the stainless steel used for the watch is highly rust-resistant, rust can form if the watch is not cleaned after it becomes dirty. Failure of oxygen to come into contact with the metal because it is dirty causes breakdown of the oxidization layer on the metal surface, which leads to the formation of rust.
  • Page 86 However, charging and discharging of the battery over the years leads naturally to a loss in its ability to sustain a charge and shortens its operating time. If this happens, contact your original retailer or authorized CASIO Service Center. E-85...
  • Page 87 City Code Table...
  • Page 88 City Code Table City UTC Offset/ City UTC Offset/ City City Code GMT Differential Code GMT Differential Pago Pago –11 Jeddah Honolulu –10 Tehran +3.5 Anchorage –9 Dubai Los Angeles –8 Kabul +4.5 Denver –7 Karachi Chicago –6 Delhi +5.5 New York –5 Dhaka...
  • Page 89 • Based on data as of June 2008. • The rules governing global times (GMT differential and UTC offset) and summer time are determined by each individual country.

Table of Contents