Printing Images; Saving Images To Cd-R Discs - Sony UPA-P100MD User Manual

Printing Images

If a digital color printer is connected to the device's
SCSI port, you can print images from the unit. During
the examination of a patient, you can print the captured
images at any time. Follow the procedure below to
print images from the unit.
1
Proceed with the capture of images as outlined in
"Grabbing Images".
2
When you are ready to print the images captured
during the current examination, press [2] on the
keyboard of the remote control. When you do, one
of two things happens.
• All the images captured from the beginning of the
current examination up to the present are printed.
• All the images captured during the current
examination since the last printout are printed.
This way, you can print images in batches or all at
once.
Note
During printing, the unit cannot be used. You must
wait until the message [Printing...] disappears and
the remote control display returns to the function
screen.
3
Continue capturing images for the same patient,
until you are finished.
4
When you have finished the examination, press
[0]. [Enter Patients name] appears on the remote
control display and the unit is ready to begin a new
operation.
Note
When [Video Printer Support] is selected in the
configuration screen, the Digital Capture Unit emits a
beep when capturing images. When you select [2×2],
the unit emits a beep after it captures 4 images. When
you select [2×3], the unit beeps after it captures 6
images. Therefore, you can use this beep as an
indicator of when one page of images can be printed.
Saving Images to CD-R
Discs
It is possible to write images from the unit to a CD-R
disc (ISO 9660 format (Joliet/Rock Ridge extension)),
which can later be accessed from a different CD-ROM
drive or archived for reference. Follow the procedure
below to save data to a CD-R disc using the Digital
Capture Unit's CD-R drive.
Note
If you want to print images, we recommend that you
do so before saving images to a CD-R disc, because
the UPA-P100MD returns to [Enter Patients name]
after the writing procedure.
Warning
• It is important not to turn off the unit while writing
images to a CD-R disc, as this could damage the unit
and/or the media.
• It is also important to make sure that the CD-R discs
that you use support a recording speed of 12X. Some
inexpensive brands of CD-R discs do not support
12X recording.
1
Insert a blank CD-R disc in the UPA-P100MD
CD-R drive. Alternately, you can use a CD-R that
was recorded in the UPA-P100MD [Multi session]
recording mode. You cannot use a CD-R disc that
was previously recorded in the UPA-P100MD
[Single session] mode.
2
Proceed with the capture of images as outlined in
"Grabbing Images".
3
When you are ready to save the images captured
during the current examination on a CD-R disc,
press [3] on the keyboard of the remote control.
All the images captured from the beginning of the
current examination up to the present are saved
on the CD-R disc.
When the operation finishes, [Enter Patients name]
appears on the remote control display and the unit
is ready to begin a new operation.
Note
If you forget to insert a CD-R disc in the CD-R
drive before pressing [3] on the remote control, the
warning message [An error occurred writing CD]
appears on the remote control display. Open the
tray, insert a CD-R disc in the tray, and then close
the tray.
22