Advertisement
OPERATION
1．Speed Adjustment
Turn the fan on by selecting the desired running speed with the Speed adjustment knob.
a. Speed 0 - Stop
b. Speed 1 – Low
c. Speed 2 – Medium
d. Speed 3 – High
WARNING: To avoid the risk of electrical shock, always make sure the fan is unplugged from the
electrical outlet before cleaning or servicing.
CAUTION: This fan should not be disassembled when cleaning internal parts, such as the blade
and motor. Disassembly may result in product damage. Never use liquids or abrasive cleaners to
clean the fan.
1.
Wipe the exterior surfaces with a soft damp cloth. Dust can be removed from the guard and blades
with a small vacuum.
2.
Do not immerse the motor, switch or wires in water and never allow water to drip into a blade or
the motor housing.
3.
Do not use any chemical cleaners such as acid or alcohol to clean the fan.
4.
Make sure the fan is completely dry after cleaning
CARE AND MAINTENANCE
WARNING: Do not attempt to open any part of the motor housing, as it can cause electrical
shock. This fan has been permanently lubricated at the factory and therefore will never require
further lubrication. Additional lubrication of electric motor parts could create a fire hazard.
1.
Fan should be stored in its original box and in a room with low humidity.
2.
Make sure the fan is completely dry before using it.
NOTE: If you experience any problems, return the fan to the place of original purchase. Do not
attempt to open the motor housing. Doing so may result in damage or personal injury.
CLEANING INSTRUCTIONS
.
Advertisement
