Assembling The Clamp-Wire; Attaching The Toroidal Ferrite Core To The Power Cord Of The Subwoofer - Samsung HW-H7500 User Manual

ASSEMBLING THE CLAMP-
WIRE
Clamp-Wire
Attach the clamp-wire to the unit as shown, and
then run the cables through the clamp-wire to keep
them neat.
ATTACHING THE TOROIDAL
FERRITE CORE TO THE POWER
CORD OF THE SUBWOOFER
You can reduce noise caused by electromagnetic
radiation by fitting the ferrite core to the power cord
of your subwoofer.
1. Unlock and open the ferrite core.
2. Wind the power cable of your subwoofer around
the ferrite core twice.
(Start winding 2 to 4 inches away from the core).
3. Close the ferrite core by pressing it until it clicks.
13
INSTALLATION
I D S E T