Component Names & Functions; Control Panel - Yamaha CP4 Stage Owner's Manual

Component Names & Functions

Control Panel

(Illustration shows the CP4 STAGE.)
A-1 B-1 C0 D0 E0
Pitch bend wheel (page 28)
Use this controller to raise or lower the pitch of played
notes in a continuously variable manner.
Modulation wheel (page 28)
Use this controller to add varying degrees of vibrato and
other effects to played notes.
[MASTER VOLUME] dial (page 18)
Turn this dial to adjust the overall volume of the stage
piano.
Part buttons (page 23)
The following Part buttons control different Parts:
[MAIN] button
Press to activate the Solo function and turn off all Parts
other than the MAIN Part.
[LAYER] button
[SPLIT] button
On the CP4 STAGE, the [LAYER] and [SPLIT] buttons can
be used to toggle on and off the corresponding Parts; on
the CP40 STAGE, both of these buttons toggle on and off
the SPLIT/LAYER Part. On both the CP4 STAGE and
CP40 STAGE, the MAIN Part is always on and cannot be
turned off.
[PART SELECT] button (page 23)
Use this button to change the currently selected Part.
Part sliders (page 28)
Use these sliders to adjust three parameters (Volume,
Chorus, and Reverb) for each of the Parts.
[SLIDER FUNCTION] button (page 28)
Use this button to change the parameter currently
assigned to the Part sliders (
12
CP4 STAGE/CP40 STAGE Owner's Manual
F0 G0 A0 B0 C1 D1 E1 F1 G1 A1 B1 C2 D2 E2
). Each time you press this
F2 G2 A2 B2 C3 D3 E3
button, the assigned parameter will change and the
indicator lights to its left will turn on and off to show the
current assignment.
[METRONOME] button (page 27)
Use this button to toggle the metronome on and off.
AUDIO PLAY/REC buttons (pages 35 and 36)
Use these buttons to control the playback and recording
of audio files.
[ ] (Stop) button
This button is used to stop playback and recording of an
audio file.
[ ] (Play) button
This button is used to start playback and recording of an
audio file. The indicator light above it will turn on during
playback and recording.
[ ] (Record) button
This button is used to open the screen for recording an
audio file. The indicator light above it will turn on during
recording.
[CHORUS] and [REVERB] SYSTEM EFFECT
buttons (page 34)
Use these buttons to toggle the instrument's main chorus
and reverb effects on and off.
[A] and [B] PART EFFECT buttons (page 34)
Use these buttons to toggle Insertion Effect A and
Insertion Effect B on and off.
[MASTER COMP] button (page 42)
Use this button to toggle the instrument's master
compressor on and off.
F3 G3 A3 B3