Fig. 1-6
10. When the washer is level, use a
9/16" (14.3 mm) open-end wrench to
securely tighten all four (4) feet locknuts
against the pedestal. (Fig. 1-7)The
locknuts must be tightened.
loc*nul ----l
11. Pull both drawer slides out and reas-
semble the drawer to the drawer slides
with the two (2) Phillips head screws.
(Fig. 1-8) Use of the two (2) dividers is
optional. Close the drawer.
Fig. t-7
Fig. t-8
1 - 8