Cisco 7914 Phone Manual page 11

Figure 5 Connecting the Interface Cable
4
Interface cable connection to the AUX jack on the
1
Cisco IP Phone
Interface cable connection to the AUX jack labeled with
2
the "in" icon on Expansion Module 1
Second interface cable connection to the AUX jack labeled
3
with the "out" icon on Expansion Module 1
Second interface cable connection to the AUX jack labeled
4
with the "in" icon on Expansion Module 2
Plug one end of the interface cable into the jack labeled
Step 1
AUX on the Cisco IP Phone.
Plug the other end of the interface cable into the AUX
Step 2
jack with the "in" icon underneath on the
Expansion Module 7914.
Note
2
3
If you are installing a second
Expansion Module 7914, continue with Steps
3 and 4. Otherwise go to the "Connect the
Power Supply" section on page 12.
1
11