Makita 9921 Instruction Manual page 7

the
q
firm11
comi
t
bag, push it onto the dust spout
s far as it will go to prevent it from
off during operation.
best results, empty the dust bag
becomes about half full, tapping it
3
remove as much dust as possible.
Dust bag
\ : ' i s
"""
action
IN
plugging in the tool, always check to see that the switch trigger actuates properly
turns to the "OFF" position when released
01 should not be in contact with the workpiece surface when you turn the tool on
Otherwise a poor sanding finish or damage of the belt may result
t
the tool, simply pull the trigger.
!
the trigger to stop. For continuous
in, pull the trigger and then push in
: button. To stop the tool from the
>osition, pull the trigger fully, then
it.
7