Mini Pak Safety; Description, Specifications And Standard Equipment Description; Specifications - RIDGID SeeSnake MINIPak Manual

SeeSnake
If you have any question concerning this Ridge Tool
product:
– Contact your local RIDGID
– Visit www.RIDGID.com or www.RIDGID.eu to find
your local Ridge Tool contact point.
– Contact Ridge Tool Technical Services Department
at rtctechservices@emerson.com, or in the U.S.
and Canada call (800) 519-3456.

MINI Pak Safety

• An improperly grounded electrical outlet can cause
electrical shock and or severely damage equip-
ment. Always check work area for a properly grounded
electrical outlet. Presence of a three prong or GFCI out-
let does not insure that the outlet is properly grounded.
If in doubt, have the outlet inspected by a licensed elec-
trician.
• Power the MINI Pak only with a specifically desig-
nated battery or a double insulated power supply.
• Do not operate this equipment if operator or ma-
chine is standing in water. Operating machine while
in water increases the risk of electrical shock.
• The MINI Pak is not waterproof. Only the camera
and push cable are waterproof. Do not expose the
equipment to water or rain. This increases the risk of
electrical shock.
• Do not use where a danger of high voltage contact
is present. The equipment is not designed to pro-
vide high voltage protection and isolation.
• Read and understand this operator's manual, the
reel operators' manual, and the instructions for any
other equipment in use and all warnings before op-
erating the MINI Pak . Failure to follow all instruction
may result in property damage and/or serious per-
sonal injury.
• Always use appropriate personal protective equip-
ment while handling and using equipment in drains.
Drains may contain chemicals, bacteria and other sub-
stances that may be toxic, infectious, cause burns or
other issues. Appropriate personal protective equip-
ment always includes safety glasses, and may include
equipment such as drain cleaning gloves or mitts, latex
or rubber gloves, face shields, goggles, protective
clothing, respirators and steel toed footwear.
• If using drain cleaning equipment at the same time
as using drain inspection equipment, only wear
RIDGID Drain Cleaning Gloves. Never grasp the ro-
tating drain cleaning cable with anything else, including
other gloves or a rag. They can become wrapped
around the cable, causing hand injuries. Only wear
4
MINI Pak
®
® distributor.
Ridge Tool Company
latex or rubber gloves under RIDGID Drain Cleaner
Gloves. Do not use damaged drain cleaning gloves.
• Practice good hygiene. Use hot, soapy water to wash
hands and other exposed body parts exposed to drain
contents after handling or using drain inspection equip-
ment. Do not eat or smoke while operating or han-
dling drain inspection equipment. This will help prevent
contamination with toxic or infectious material.
Description, Specifications And
Standard Equipment
Description
The SeeSnake ® MINI Pak is a modern, hand-portable
monitor and camera control unit for use with a SeeSnake
Pipe Inspection diagnostic system.
The MINI Pak is designed to easily connect with a
SeeSnake reel and camera and provide a clear image of
the camera's field of view. It provides readily accessible
controls for adjusting the camera and the display, and for
controlling the 512 Hz in-line Sonde built in to most
SeeSnake cameras, which allows the operator to locate
the camera when it is underground. The MINI Pak also en-
ables the operator to connect an external transmitter to the
SeeSnake cable and use a standard locator to line-trace
the path of the SeeSnake cable in a pipe.
The MINI Pak is used in conjunction with any SeeSnake
reel configuration (see Figure 8) . Other auxiliary equip-
ment used with the SeeSnake MINI Pak includes:
• Rechargeable batteries (Ridge CAT # 32743).
• A RIDGID locator/receiver (such as the SR-20, the
SR-60, the Scout™ or the NaviTrack
• A RIDGID transmitter (such as the ST-510, the ST-305,
the ST-33Q, the NaviTrack
watt transmitter).
• The Count Plus Cable Counter cable-measurement
system, normally built into SeeSnake pipe inspection
systems.

Specifications

Weight ...........................4.25 lbs (1.93kg) w/o Battery
Dimensions:
Depth...........................14" (35.5 cm)
Width ...........................7.6" (19.2 cm)
Height ..........................10" (26.8 cm)
Power Source................100-240VAC/50-60Hz, AC or
18 VDC Rechargeable Battery
Battery Type ..................18 V Li-Ion, 2.2 Ah
Power Rating.................14-16 VDC 25W
® II).
® Brick or the NaviTrack ® 10-