INTRODUCTION
PURPOSE
This manual explains the system description, the hardware installation and the programming procedure for
the Wireless Communication System (WCS) on the NEAX 2000 IPS INTERNET PROTOCOL SERVER.
OUTLINE OF THIS MANUAL
This manual consists of four chapters and one appendix. The following paragraphs summarize Chapters 1
through 4 and appendix.
CHAPTER 1
CHAPTER 2
CHAPTER 3
CHAPTER 4
APPENDIX
GENERAL INFORMATION
This chapter explains the WCS system outline, the equipment name and function,
system specifications, capacity and conditions.
INSTALLATION
This chapter explains the hardware installation procedure to provide WCS interface
to the PBX.
SYSTEM DATA PROGRAMMING
This chapter explains the programming procedure to provide the WCS feature to the
PBX.
CIRCUIT CARD INFORMATION
This chapter explains the mounting location, the meaning of lamp indications, and
the switch settings of each WCS circuit card.
WCS FEATURES AND SPECIFICATIONS
This appendix contains the WCS Features and Specifications, which explains the
general description, operating procedure, and service conditions for each WCS
feature.
PURPOSE/OUTLINE OF THIS MANUAL
– 1 –
INTRODUCTION
NWA-008855-001 Rev.1.0
avch0001.fm