Ml440 Handset Features; Account Codes; Barge In (Intrusion); Call Coverage Keys - NEC ML440 Quick Setup Manual

ML440 Wireless IP DECT Quick Reference Guide
18 | DSX |

ML440 Handset Features

Account Codes

Account codes are disabled by default.
There are no Account Code Feature Keys assigned by default.
Dialing to enter an Account Code is disabled by default.
#
To enter an Optional (Unforced) Account Code:
1. Place or answer outside call.
2. Press your Account Code Feature Key or dial # (if enabled).
3. When your display shows
a) An Account Code can be up to 10 digits long, using the digits 0-9.
4. To return to the call, press your Account Code Feature Key or dial # (if enabled).
a) If the number doesn't dial out within 6 seconds, your system probably has Store and Forward enabled.
b) If your system has Forced Account Codes enabled, you have to enter an Account Code each time you place
an outside call. If your system also has Veri ed Account Codes enabled, you must enter a code from the
Veri ed Account Codes Table.

Barge In (Intrusion)

Barge In is disabled by default.
To Barge In on a call:
1. Place one of the following types of call:
a) Call a busy extension.
b) Press a line key for a busy line.
c) Press
TALK
d) Press
TALK
e) Press
TALK
2. Dial .
4
a) You hear two beeps.
3. Join the call in progress
a) Caution: Unauthorized intrusion on calls using this feature may be interpreted as an invasion of privacy.

Call Coverage Keys

There are no Call Coverage Feature Keys assigned by default.
Call Coverage Feature Keys will intercept the following types of calls:
• Key Ring Calls
• Ringing Intercom calls
Enter Account Code
and dial a Line Group access code (e.g., 9).
and dial for busy line (i.e., using Direct Line Access).
101
and dial for busy line (i.e., using Line Dial-up).
#901
, enter the Account Code.