Web User Interface; Setup Section - D-Link ShareCenter DNS-343 User Manual

The DNS-343 web UI defaults to the Setup page. The main categories for configuration are located in the menu tabs at the top of the page. These categories include:
• Setup - Contains the DNS-343 setup Wizard, LAN Setup, Time and Date settings and Device settings.
• Advanced - Allows the DNS-343 administrator to configure RAID options, Users, groups of users and their storage quotas. The FTP Server, UPnP AV server, iTunes
server, LLTD, DHCP Server, LLTD and Remote Backup settings are also contained here.
• Maintenance - Allows the DNS-343 administrator to reset the Admin Password, perform System maintenance tasks, carry out Firmware Upgrades, configure e-mail
alerts, configure Power Management options, configure Dynamic DNS, change the OLED Display settings and get diagnostic information about the installed Hard Disks.
• Status - Shows current information about the LAN configuration, Device, Printer and Hard drives installed.
• Support - Contains help files for your DNS-343.
These pages and their configuration options will be discussed in detail in the following pages of this manual.
Wizard:
The DNS-343 4-Bay Network Storage Enclosure
provides a convenient and safe location on the network
for storing data and media. The Setup Wizard will let
you adjust basic settings for your device.
LAN Setup:
The LAN Settings allow you to configure the Link
Speed and to configure the IP address as a DHCP
client or Static IP.
Time and Date:
The Time configuration option allows you to configure,
update, and maintain the correct time on the internal
system clock. From this section you can set the time
zone that you are in and set the NTP (Network Time
Protocol) Server to periodically update your system
time from the NTP Server. You can also copy your
computer's time as the system time.
Device:
Workgroup and Active Directory configuration can be
done here.
D-Link DNS-343 User Manual

Web User Interface

Setup Section

16