Sequencing; Time/Date Display; Titles Display - JVC SW-D7000U Instruction Manual

SW-D7000U, 9CH. COLOR VIDEO MULTIPLEXER
The default setting is Frame. To switch between to 'Field' use the left or right arrow keys to
toggle between 'Frame' and 'Field' settings.
Note: This is a global system setting, not a camera-by-camera setting.
Field or Frame Indication (Color Models)
A "-" will be displayed next to the time / date display of camera 1 only to indicate that 'field'
resolution has been selected. The indicator is removed if 'frame' resolution has been selected.
3.7.6

SEQUENCING

This option lets you specify the sequence dwell time (as displayed when
pressed). The multi-screen dwell time, (for the sequencing cameras in multi-screen mode) and
the Live and Play full screen dwell times are also set here. The following pull down menu is
displayed.
The full-screen dwell times are the same for both Monitor-A and Monitor-B in Live and Play
modes. Dwell time settings determine the time between each camera sequence in the sequence
list.
NOTE: The camera sequence list for Monitor-A and Monitor-B is programmed using the
AutoList™ feature.
3.7.7

TIME/DATE DISPLAY

This option lets you specify whether the data and time are to be displayed on Monitor A and
Monitor B. You get the following pull-down menu:
To change displays use the left or right arrow keys to turn displays ON or OFF.
3.7.8

TITLES DISPLAY

This option lets you specify whether the titles are to be displayed on Monitor A and Monitor B.
You get the following pull-down menu:
JVC PROFESSIONAL, IMAGING PRODUCTS
Multi-screen Dwell
Live Full Dwell
Play Full Dwell
Exit
Time and Date Display
Monitor A: ON
Monitor B: ON
[CANCEL] [OK]
Titles Display
Monitor A: ON
Monitor B: ON
SEQUENCE
key is
37