Table of Contents
Advertisement
Available languages
Available languages
ENGLISH (Original instructions)
SPECIFICATIONS
Model
Hard joint
Fastening
torque
Square drive
No load speed (RPM)
Dimensions
Net weight
Rated voltage
Standard battery cartridge
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
4.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
BFL201R
10 - 20 N • m (88.5 - 177 in • lbs)
Soft joint
10 - 20 N • m (88.5 - 177 in • lbs)
9.5 mm (3/8")
360 /min.
429 mm x 72 mm x 98 mm
(16-7/8" x 2-13/16" x 3-7/8")
1.7 kg (3.7 lbs.)
16 - 30 N • m (142 - 266 in • lbs)
16 - 30 N • m (142 - 266 in • lbs)
9.5 mm (3/8")
477 mm x 72 mm x 98 mm
(18-25/32"x 2-13/16"x 3-7/8")
2.0 kg (4.4 lbs.)
D.C. 14.4 V
GEA006-2
6.
Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal Safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
11.
Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
12. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools
that have the switch on invites accidents.
2
BFL301R
25 - 40 N • m (221 - 354 in • lbs)
25 - 40 N • m (221 - 354 in • lbs)
260 /min.
477 mm x 72 mm x 98 mm
(18-25/32"x 2-13/16"x 3-7/8")
BL1430
BFL402R
9.5 mm (3/8")
200 /min.
2.0 kg (4.4 lbs.)
Hide quick links:
Advertisement
Table of Contents
