Restore Default Settings; Auto Prefix; Set Detect Digit Number; Set Auto Prefix Number - Motorola STARTEC SC200 User Manual

6. Press to return to standby.
10.3

Restore default settings

You can restore your SC200 to its default (original) settings.
All the handsets that are registered to the base will be
retained.
IMPORTANT
Resetting your phone to its default settings will delete all
entries in the Redial list and Calls list. All handset and base
settings will also be reset.
1. Press , the display shows PHONEBOOK.
2. Scroll to ADVANCED SET
3. Scroll to RESET and press
4. The display shows CONFIRM?. Press
5. Press to return to standby.
10.4 Auto prefix
This feature checks and formats a pre-dialled outgoing
number before it is dialled out.

10.4.1 Set detect digit number

You can set a detect number that can be up to 5 digits,
once this number has been set the phone will check the
first few digits of the any pre-dialled number and if they
match the detect number will be replaced them with the
prefix number.
32
and press .
.
.
1. Press , the display shows PHONEBOOK.
2. Scroll to ADVANCED SET
3. Scroll to AUTO PREFIX and press
4. The display shows DETECT
5. Enter the number and press
6. Press to return to standby.
10.4.2 Set auto prefix number
You can define a prefix number (maximum of 10 digits) to
be added to the beginning of any pre-dialled number.
1. Press , the display shows PHONEBOOK.
2. Scroll to ADVANCED SET
3. Scroll to AUTO PREFIX and press
4. Scroll or to PREFIX and press
5. Enter the number and press
6. Press to return to standby.
NOTE
If no detect number is set the prefix number will be added
to all pre-dialled numbers.
and press .
.
DIGIT and press .
.
and press .
.
.
.
Advanced settings