Copying still pictures
Copying automatically
[SD] > [HDD]
This unit saves information about imported still pictures.
Therefore, if still pictures are imported from the same SD
card, then only new still pictures will be copied.
[USB] > [HDD]
All pictures in USB memory will be copied.
1
While stopped
Insert the SD card or the USB memory.
e.g., [SD]
SD Card
Play Video ( AVCHD )
View Pictures ( JPEG )
Copy Video ( AVCHD )
Copy Video ( MPEG2 )
Copy Pictures ( JPEG )
SD card is inserted.
OK
RETURN
2
Select "Copy Pictures ( JPEG )", then
press [OK].
Copy New Pictures ( JPEG )
Copy from
Copy to
Copy added pictures ( JPEG ) by date.
Copy
OK
RETURN
3
Select "Copy", then press [OK].
≥[SD] Even if protection of the card is set, copy will
start.
≥[USB] Copy will start.
4
[SD]
Select "Copy & Delete" or "Copy Only",
then press [OK].
If "Copy & Delete" is selected, copied pictures in the
SD card will be deleted after copying.
SD CARD
HDD
Cancel
To stop copying
Press and hold [RETURN
≥ Pictures without shooting date will be categorised using the creation
date.
≥ If the space on the destination drive runs out or the number of files/
folders to be copied exceeds the maximum (
partway through.
≥ This unit saves the information on up to 12,000 still pictures and 30 SD
cards. If additional still pictures are imported, the older information will
be deleted.
] for 3 seconds.
100), copying will stop
53
VQT2X37