Position Adjustment; Power Indicator - JVC HD-ILA HD-52G456 User Manual

Initial Setup

Position Adjustment

Position adjustment allows you to adjust the position of the picture on the screen vertically
when the aspect is set to panorama, cinema or full.
π †
è
è
π †
Notes:
• To reset the adjustment to the center, press the
O button.
K
• When the arrow disappears, while you are adjusting the position, the position is at its
maximum limit.
• If you select regular size and slim size with aspect or Multi Screen, position adjustment
option is not seen.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position vertically and horizontally when
the aspect is set Panorama Zoom or Cinema Zoom for 1080i and 720p signals.

Power Indicator

Power indicator allows you to adjust the brightness of the power indicator
π †
è
Notes :
• When OFF is selected :
The LED disappears if you have a TV signal.
The LED is lit as "LOW" when there is no TV signal.
• When the On Timer turns ON, the LED is lit as
"LOW" when you turn the power off.
• If you set a timer on the TV, the power indicator will light even if the TV is on stand by.
Downloaded from www.Manualslib.com
Press the M button
ENU
To POSITION ADJUSTMENT
To enter
To adjust the position
Press the M button to finish
ENU
Press the M button
ENU
To POWER INDICATOR
To adjust POWER INDICATOR LOW, HIGH
or OFF
manuals search engine
OPERATE RESET
OK
INITIAL SETUP
PREVIOUS
NOISE MUTING
FRONT PANEL LOCK
VIDEO INPUT LABEL
POSITION ADJUSTMENT
POWER INDICATOR
NEXT PAGE
SELECT OPERATE
EXIT
MENU
ON
OFF
HIGH
(2/5)
EXIT
MENU
49