Casio 5159 Operation Manual

MA1012-EA
Contents
General Guide .......................................................................................................... E-4
About the Backlight ................................................................................................. E-6
Calendar Mode ......................................................................................................... E-7
Timekeeping Mode .................................................................................................. E-9
Alarm Mode ............................................................................................................ E-12
Stopwatch Mode .................................................................................................... E-15
Dual Time Mode ..................................................................................................... E-17
Specifi cations ........................................................................................................ E-19
E-2
General Guide
Press B to change from mode to mode.
Calendar Mode
E-4
About the Backlight
Hold down L to illuminate the display for about 2 seconds. The backlight is
disabled while an input screen (with a fl ashing setting) is on the display.
The backlight of this watch employs an electro-luminescent (EL) light, which loses its
illuminating power after very long term use.
Frequent use of the backlight shortens the battery life.
The watch emits an audible sound whenever the display is illuminated. This does
not indicate malfunction of the watch.
The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.
The backlight automatically turns off whenever an alarm sounds.
E-6
A until the ADJ indicator starts to fl ash, followed by fl ashing of the
1. Hold down
year digits.
B to increase the year digits. Holding down B changes the digits at high
2. Press
speed.
A to move the selection to month digits.
3. Press
B to increase the month digits. Holding down B changes the digits at high
4. Press
speed.
A to move the selection to the day digits.
5. Press
B to increase the day digits. Holding down B changes the digits at high
6. Press
speed.
A to complete the procedure.
7. Press
If you do not operate any button for a few minutes while a selection is fl ashing, the
fl ashing stops and the watch goes back to the Calendar Mode automatically.
The date can be set with the range of January 1, 2000 to December 31, 2099.
The day of the week changes automatically in accordance with the date.
E-8
Operation Guide 5159
Timekeeping Mode
Crown
About This Manual
Button operations are indicated using the letters shown
in the illustration.
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
To set the date ......................................................................................................... E-7
To set the time and date ......................................................................................... E-9
To set the hands .................................................................................................... E-11
To set the Alarm Time ........................................................................................... E-13
To stop the alarm ................................................................................................... E-13
To turn the Daily Alarm on and off ....................................................................... E-14
To test the alarm .................................................................................................... E-14
To use the Stopwatch ........................................................................................... E-16
To set the Dual Time ............................................................................................. E-17
Alarm Mode Stopwatch Mode
Calendar Mode
This is the normal mode for this watch.
To set the date
Second hand Hour hand
Minute hand
Crown
Month
Day Day of week
Timekeeping Mode
Use this mode to set the current time. An incorrect time setting will result in incorrect
operation of the calendar.
To set the time and date
Crown
Hour
Minutes Seconds
E-1
E-3
Dual Time Mode
E-5
Year Month Day
E-7
Seconds Hour
12/24 Minutes
E-9