Feed Belt; Removing The; Removing The Feeding Belt; Attaching The Feeding Belt - Canon DADF-Q1 Service Manual

[1]
[1]

3.4.3 Feed Belt

3.4.3.1 Removing the Front Cover
1) Remove the front cover [1].
-Three screws [2] (remove)
-One screw [3] (loosen)
F-3-101
F-3-102

3.4.3.2 Removing the Feeding Belt

1) Turn the releasing lever [1] clockwise to decrease the tension of the belt.
[4] [5]
[4] [5]
F-3-99
F-3-100
2) Turn the releasing levers (left/ right) [1] outward after removing the two
fixing screws [2] each.
0011-8210
3) Detach the feeding belt [1].

3.4.3.3 Attaching the Feeding Belt

1) Insert a screwdriver between the DADF and the feeding assembly as
shown to increase the gap.
2) Fit in the feeding belt, and pull out the screwdriver when the belt has
0011-2657
come into contact with it; then, push in the belt.
[1]
F-3-103
[1]
[2]
F-3-104
[1] [2]
F-3-105
[1]
F-3-106
Chapter 3
0011-2658
3-15