Hardware Installation - GE 98793 Instruction Manual

5.

Hardware Installation

Please keep these directions in a safe place.
1) Insert the enclosed batteries into the battery compartment of
your mouse following the directions in Section 4.
2) Plug the Optical Mini Mouse receiver into an available USB
port on your computer or USB hub. It is not necessary to
reboot your computer.
3) If prompted, insert your Windows disk and follow the on
screen instructions. (This step is not necessary for all
operating systems. Your system will prompt you if it is
necessary.)
4) The mouse should auto link requiring no further installation
procedure.
5) In case the auto link feature does not occur, you must
manually link your mouse to your receiver.
6) Press the link button on your receiver.
7) Press the link button on the bottom of your mouse.
8) Your mouse should now function normally.
mouse to test functionality.
Page 7
Move your