Canon iPF6100 Service Manual page 76

Chapter 1
First Level
[Interface Setup]
[Maintenance]
1-60
Second Level
[TCP/IP] [Protocol] (*4)
[IP Setting] (*14)
[NetWare] [NetWare]
[Frame Type] (*6)
[Print Service] (*6)
[AppleTalk] [On]
[Off]*
[Ethernet Driver] [Auto Detect]
[Comm.Mode] (*7)
[Ethernet] (*7)
[Spanning Tree]
[MAC Address]
[Ext.Interface] [No]*
[IEEE1394]
[Init. Settings] [No]*
[Yes]
[Repl. maint. cart.] [No]
[Yes]
T-1-33
Third Level Fourth Level
[BOOTP]
[RARP]
[IP Address]
[Subnet Mask]
[Default G/W]
[On]
[Off]*
[Auto Detect]
[Ethernet 2]
[Ethernet 802.2]*
[Ethernet 802.3]
[Ethernet SNAP]
[BinderyPServer]
[RPrinter]
[NDSPServer]*
[NPrinter]
[On]
[Off]*
[Half Duplex]*
[Full Duplex]
[10 Base-T]*
[100 Base-TX]
[Not Use]*
[Use]
Fifth Level
[On]
[Off]*
[On]
[Off]*
0.0.0.0* to 255.255.255.255
0.0.0.0* to 255.255.255.255
0.0.0.0* to 255.255.255.255