4.6
Display of hot plates
Fig. Display of hot plates
These components accommodate the LED to display the cooking levels set at the 4 hot plates.
4.7
Set value transmitter (hot plates)
At the set value transmitter, each angular degree of switch turning changes an existing voltage
value and/or resistance value. Thus turning the switch results in a change of the existing
temperature at the heater. Control is via the power board.
Fig. Set value transmitter (function and temperature)
Fig. Temperature controller
TSE-N 01.01 A. B.
1 = 5 V
- 11 -
599 50 93 79
EN