Sony DFS-700 Service Manual page 51

Adjusting Image Colors — Color Correction
4
Watching the image on the monitor, turn the F1 to F5 knobs to adjust
the color.
F1(Gain): adjust the chrominance gain (the depth of the colors).
F2(Hue): adjust the hue.
Note
When F3(Offset) is set to its minimum value of zero, turning the
F2(Hue) knob has no effect on the hue.
F3(Offset): vary the adjustment range of the F2(Hue) knob.
The larger the value of "Offset," the wider the range of color
adjustment. A smaller value for "Offset" means that the F2(Hue)
knob can be used for fine adjustment.
F4(HueRot): set the hue.
F5(Gamma): adjust the gamma value of the luminance signal.
To turn off the color correction function
In the menu control section press the CCR button, turning it off.
3-60
Chapter 3 Basic Operation
Freezing an Input Image — Frame Memory
Function
Using the frame memory function, you can capture a "freeze frame" from
input video or store a still frame. You can then use this still image as a
video source.
Procedure
To capture a freeze frame in memory, use the following procedure.
EDITOR
GPI
SET UP
SHIFT
3
AUXILIARY
BLACK
BACKGROUND
BLACK
4
FOREGROUND
BLACK
1
If the FREEZ button is lit, press it, turning it off.
2
In the delegation section press the MEMORY button, turning it on.
3
Press one of the AUXILIARY buttons, turning it on, to select the input
video signal.
4
Press the MEMORY button in the BACKGROUND bus button row,
turning it on.
5
• To capture a frame from still video, press the FRAME button turning
it on.
• To capture a field from moving video, leave the FRAME button off.
(Pressing the FRAME button toggles it on and off.)
6
Press the FREEZ button, turning it on, to capture the image. (For
capture from a moving video input, press the FREEZ button at the
point you want to capture.)
The captured image appears on the output bus, and is written to
memory.
Note
Even if other than MEMORY is selected on the BACKGROUND bus
buttons, you can still capture the selected image with an AUXILIARY
button.
2 5 1,6
USER PGM SNAP SHOT
1 TITLE 2 DSK EDGE
STATUS EDIT
LUM LUM LUM TRAIL
SHADOW
CRK CRK BORDER BEVELD
EDGE INITIAL EDIT LEARN
MASK MASK MASK SOFT
RECALL
CCR LIGHTING MATTES BORDER PATTERN PAGE F1 F2 F3 F4 F5 LOCATION
HOLD
ADJ INPUT
EFFECT
TRANS RATE DSK PATTERN NUMBER
FTB SET SET
CCR TITLE 1 TITLE 2 DSK SUPER BG FRGD 2 MEMORY FRAME FREEZ MIX EFFECT N/R REV DIRECT DIRECT DSK PVW
RECALL PATTERN
SOURCE SOURCE FILL
LAST X FADE
TO
1 2 3 4 5 6 7 8 7 8 9 INS BLACK
MEMORY INT TITLE
VIDEO
4 5 6 DEL
INT
1 2 3 4 5 6 7 8 MEMORY CUT
VIDEO
P IN P
DSK
1 2 3 RST
DOWN UP ENTER
0
INT AUTO
1 2 3 4 5 6 7 8 MEMORY
VIDEO TRANS
PATTERN/KEY PAD
3-61
Chapter 3 Basic Operation