Chapter 10 123Scan
Introduction
This chapter includes the bar code you must scan to use the 123Scan program.
123Scan is a Windows ® based utility that enables programming the scanner with all parameters including
Advanced Data Formatting (ADF) rules. An ADF rule modifies bar code data before it is sent to the host to ensure
compatibility between bar code data and the host application. Scanners can be programmed via PC download or
by scanning a sheet of bar codes generated by the utility. Scanner programming is saved in a file for electronic
distribution. The 123Scan program includes a help file.
Communication With the 123Scan PC Based Configuration Tool
To communicate with the 123Scan program which runs on a host running a Windows operating system, use an
RS-232 cable to connect the scanner to the host (see
123Scan requirements:
•
Host computer with Windows
•
Scanner
•
RS-232 cable.
123Scan Parameter
To communicate with the 123Scan program, load 123Scan onto the host computer and scan the bar code below.
Refer to 123Scan instructions for programming the scanner.
NOTE Scanning this bar code enables the 123Scan interface on the scanner.
Connecting an RS-232 Interface on page
123Scan Configuration
6-2).