Installing The Usb Driver - Sony DCR-PC115E Operating Instructions Manual

Viewing images using computer
Notes
•Operations are not guaranteed for either the
Windows or Macintosh environment if you
connect two or more USB equipment to a single
computer at the same time, or when using a
hub.
•Depending on the type of USB equipment that
is used simultaneously, some equipment may
not operate.
•Operations are not guaranteed for all the
recommended computer environments
mentioned above.
•All other product names mentioned herein may
be the trademarks or registered trademarks of
their respective companies. Furthermore, "™"
and "®" are not mentioned in each case in this
manual.

Installing the USB driver

Before connecting your camcorder to your
computer, install the USB driver to the computer.
The USB driver is contained together with
application software for viewing images on a
CD-ROM which is supplied with your
camcorder.
Do not connect the USB cable to your computer
before installation of the USB driver is
completed.
Example: For Windows 98/98SE/Me,
Windows 2000 users
(1) Turn on the power of your computer and
allow Windows to load.
(2) Insert the supplied CD-ROM in the CD-ROM
drive of your computer. The application
software screen appears.
(3) Set the cursor on "USB Driver Installation for
Windows 98/98SE/Me and Windows 2000"
and click. USB driver installation starts.
(4) Follow the on-screen messages to install the
USB driver.
(5) Connect the (USB) jack on your camcorder
with the USB connector on your computer
using the supplied USB cable.
(continued on the following page)
•
•
•
•
(1)
(2)
(3)
(4)
(5)
®
197