Front Panel Assembly - JVC MX-GT90 Service Manual

MX-GT90
<Front panel assembly>
Prior to performing the following procedure, remove
the metal cover, the CD changer mechanism
assembly and the front panel assembly.
Removing the
assembly (See Fig.25)
1. Disconnect the card wire from connector CN306 on
the head amplifier & mechanism control board.
2. Remove the four screws M and three screws M'
attaching the cassette mechanism assembly.
Removing the display system control
board (See Fig.26 to 28)
1. Remove the four screws O
bracket.
2. Disconnect the card wires from connector CN316 and
CN880 on the display system control board.
3. Remove the seven screws P attaching the display
system control board.
4. If necessary, disconnect the wire from connector
CN911 on the front side of the display system control
board and unsolder FW915.
If necessary, remove the CD play board. (Fig. 29)
Removing the CD eject board
1. Remove the three screws Q attaching the CD eject
board.
2. If necessary, unsolder FW915 on the CD eject
board.
CD eject board
FW915
(Soldering)
Q
1-12
cassette mechanism
attaching the stay
(See Fig.28 and 29)
Q
Fig.29
Head amplifier
& Mechanism control board
CN306
N
N'
Cassette mechanism
assembly
Display system control board
P
P
FW915
(Soldering)
P
CN880
Display system control board
N
N
N'
N'
Fig.25
O
Stay bracket
Fig.26
CN316
P
P
Display system control board
Fig.27
CD eject board
CN911
FW915
FW915
Fig.28