AEG DVD 4533 Instrution Manual page 45

Use of ear/headphones
(Fig. 1/17; Fig. 2/11)
Inputs on the side of the device
Switching on the player
(Fig. 1/11; Fig. 2/15)
Connecting other Playback Devices
05_DVD4533-GB.indd 45 05_DVD4533-GB.indd 45
ATTENTION:
Do not short-circuit the terminals.
Only the original charging device should be used to charge the
battery.
Never throw into a fi re or water; do not heat.
Do not open the charged battery. Repairs must be carried out by a
qualifi ed technician.
1. If you use a set of headphones you should use one with a 3.5 mm
stereo jack, which should be inserted into headphone socket ( ).
2. With the VOL+/ VOL buttons you can set the desired value.
WARNING:
Make sure that the volume of your headphones or earphones is
not too high, as otherwise this may damage your ears and you may
endanger yourself or others.
In order not to disturb those around you the volume should be set
to a low level.
If you suff er from tinnitus you should turn the volume down low
or refrain from using this device.
Ear doctors recommend that earphones should not be used conti-
nuously over a prolonged period.
Digital
Connect the Coaxial cable for transmission of digital Audio signals to
your playback device or your amplifi er.
1. Insert the audio plug into the COAXIAL socket on the left-hand side
of the DVD/MONITOR device (Fig. 1/16).
2. Plug the Audio jack into the corresponding socket on your playback
device or your amplifi er.
USB Input (on the left-hand side of the device) (Fig. 1/20)
Insert a USB storage medium into the corresponding socket on the left-
hand side of the device.
Memory Card Slot (on the top of the device) (Fig. 1/21)
Insert an MMC/SD or MS Memory card into the card slot on the top of
the device.
Turn on the main switch of the device by moving the mains on/off
switch "ON/OFF" on the side of the device to the "ON" position.
In order to play back the picture from another playback device (e.g.
digital camera) on the LCD screen, connect the audio/video cable to the
AV IN socket (Fig. 1/15) and the other end to the playback device. Press
the SOURCE button (Fig. 3/28) in order to switch the device over to AV
IN operation.
English
45
08.07.2008 16:38:55 Uhr 08.07.2008 16:38:55 Uhr