Start-Up Guide; Checking The Accessories; 1: Attaching The Table-Top Stand - Sony Bravia KDL-60R550A Operating Instructions Manual

Start-up Guide

Checking the
accessories
Table-Top Stand (1)*
Fixing screws for Table-Top Stand (M5 ×
16) (4)
Assembling screws for Table-Top Stand
(M4 × 12) (6)
Remote RM-ED056 (1)
Size AAA batteries (R03 type) (2)
3D Glasses (4)
* Assemble the Table-Top Stand with the supplied
assembling screws. Refer to the supplied Table-Top
Stand instruction leaflet to assemble the Table-Top
Stand.
x To insert batteries into the remote
• Observe the correct polarity when inserting
batteries.
• Do not use different types of batteries together
or mix old and new batteries.
• Dispose of batteries in an environmentally
friendly way. Certain regions may regulate the
disposal of batteries. Please consult your local
authority.
• Handle the remote with care. Do not drop or
step on it, or spill liquid of any kind onto it.
• Do not place the remote in a location near a heat
source, a place subject to direct sunlight, or a
damp room.
1: Attaching the
Table-Top
Stand
• Refer to the supplied Table-Top Stand
instruction leaflet for proper attachment.
• For best picture quality, do not expose the
screen to direct illumination or sunlight.
• Firstly, assemble the Table-Top Stand
according to its leaflet.
• For watching 3D video, make sure you install the
TV so that your eyes will be at the same level as
the TV screen centre point.
1
Place the TV set on the Table-Top Stand.
2
Fix the TV to the Table-Top Stand using the
supplied screws. The arrow marks
indicate the location of the screw holes used
for securing the Table-Top Stand.
• Hold the Table-Top Stand with one hand to
avoid it dropping when attaching.
(Continued)
5
GB