Adjusting The Resolution And Contrast - Sharp UX-P410 User Manual

Adjusting the Resolution and Contrast

3
Adjust the resolution and/or contrast settings as explained in
Resolution and Contrast below, then dial the receiving machine as
explained on page 30.
Adjusting the Resolution and Contrast
If desired, you can adjust the resolution and contrast before sending a
document.
♦
The default resolution setting is STANDARD and the default contrast setting
is AUTO.
♦
You must adjust the settings each time you don't want to use the default
settings.
Note: The resolution and contrast settings are only effective for sending a
document. They are not effective for receiving a document.
Resolution settings
STANDARD
FINE
SUPER FINE
HALF TONE
28
Use STANDARD for ordinary documents. This
setting gives you the fastest and most
economical transmission.
Use FINE for documents containing small letters
or fine drawings.
Use SUPER FINE for documents containing
very small letters or very fine drawings.
Use HALF TONE for photographs and
illustrations. The original will be reproduced in
64 shades of gray.