Bosch Integral TH13 Operating Instructions Manual page 81

Setting handsfree calling
Setting handsfree calling
Office normal, telephone loudspeaker
Office attenuated, tel. loudsp.
Office liven, telephone loudspeaker
Office normal, auxiliary loudspeaker
Setting handsfree calling
Office normal, telephone loudspeaker
Office attenuated, telephone loudsp.
Office liven, telephone loudspeaker
Office normal, auxiliary loudspeaker
Activating the internal loudspeaker again
Connector
Setting up the telephone for your own specific needs
Handsfree calling with auxiliary loudspeaker A
Select menu item "Setting handsfree cal-
ling".
The current setting is tagged.
Scroll to "Office normal, auxiliary loudspea-
–
ker" setting.
The current setting is tagged.
Press the "Enter" key to confirm the set-
Enter
ting.
In doing so, the new setting is stored.
Note:
If your call partner informs you of a less
than optimal transmission quality , you can
switch the handsfree mode down a level.
AEI interface to Pull the auxiliary loud speaker plug from
the underside of
the telephone's AEI-Z-interface.
the telephone
Plug the connector into the telephone's
AEI-Z-interface. The internal loudspeaker
is hence activated again.
XY Z Set handsfree talking in the menu "Setting
AEI
acoustics + contrast" ( p. 84).
81