Printing A Transaction Report / Image Sending Activity Report; Transaction Report - Sharp MX-FXX1 Manual

PRINTING A TRANSACTION
9
REPORT / IMAGE SENDING
ACTIVITY REPORT
This chapter explains how to print out and check the results of transmissions and receptions.

TRANSACTION REPORT

A transaction report is printed when transmission fails or after a broadcast transmission or a confidential reception. The
conditions for printing a transaction report can be changed. The conditions can also be changed for only a single
transmission.
Example of a transaction report
The report shows the date, starting time, name of the other party, time required, number of pages, and result.
TRANSACTION REPORT
FAX (T X )
# DATE
0 01 01/ APR
• System Settings (Administrator): Transaction Report Print Select Setting
This is used to set the conditions for printing transaction reports.
The factory default settings are print at
Single Sending: Print Out All Report/
Broadcasting:
Receiving: Print Out All Report/Print Out Error Report Only/
Confidential reception:
• System Settings (Administrator): Original Print on Transaction Report
This is used to have part of the transmitted original printed on the transaction report.
START T. SENDER
09:45AM x x x x x x x x x
Print Out Error Report Only
Print Out All Report
/Print Out Error Report Only/No Printed Report
Print Out Notice Page
01/APR/2006/SAT 10:00 AM
COM. TIME PAGE
0 :00 :13 1
below.
/No Printed Report
No Printed Report
/No Printed Report
124
P. 01/01
TYPE/NOTE FILE
O K S G3 26 97