Main Menu
Table of Contents
Lights
3.
Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
248
Maintenance
Replacing a Rear License Bulb
Remove the socket from the light
1.
assembly by squeezing the tabs on
both sides of the socket.
2.
Pull the bulb straight out of its
socket. Push the new bulb in until
it bottoms in the socket.
3.
Turn on the parking lights and
check that the new bulb is
working.
4.
Reinstall the socket back in place
by pushing it in until it latches.