Scanning In Presentation Mode - Motorola Symbol DS3408 Product Reference Manual

2 - 8 Symbol DS3408 Product Reference Guide

Scanning in Presentation Mode

The optional Intellistand adds greater flexibility to scanning operation. When you place the digital scanner in the
stand's "cup," the scanner's built-in sensor places the scanner in presentation (hands-free) mode. When you
remove the digital scanner from the stand it operates in its normal hand-held mode.
Scanner "Cup"
Inserting the Digital Scanner in the Intellistand
Figure 2-6
To operate the digital scanner in the Intellistand:
Connect the digital scanner to the host (see the appropriate host chapter for information on host connections).
1.
Insert the digital scanner in the Intellistand by placing the front of the digital scanner into the stand's "cup" (see
2.
Figure 2-6).
Use the Intellistand's adjustment knobs to adjust the height and angle of the digital scanner.
3.
Center the symbol in the aiming pattern. The entire symbol must be within the brackets.
4.
Upon successful decode, the digital scanner beeps and the LED turns green. For more information on beeper
5.
and LED definitions, see
Adjust angle of
scanner "cup"
Adjust height of
IntelliStand
Table 2-1 and Table 2-2.