Checking Troubleshooting - Panasonic FP-D355 Operating Instructions Manual

Checking
Troubleshooting
Before you call service
Check
Unit does not operate
Does the display light?
(See P .9)
Does the Energy saver key flash (or light)
and displays are turned OFF?
(See P .38)
Do any of the U## codes and messages
appear on display?
(U0, U4, U10, U12, U13....etc.,)
Does the add staples indicator and
message appear on display? (0)
(See P .61, 64 or 69)
Does the add paper indicator and message
appear on display? (J/
(See P .11)
Does paper misfeed indicator and
message appear on display? (I)
(See P .78)
Does any of the E#-## indicator and
message appear on display?
Does the remove punch dust indicator and
message appear on display? ( )
(See P .77)
Does the call service indicator and
message appear on display? (2)
(See P .11)
)
Action
Check if the Power Switch is turned on and
if the power plug is inserted into the outlet.
Press Energy saver key on control panel.
Perform actions in accordance with each
message.
Add staples.
(See P .61, 64 or 69)
Add paper.
(See P .14, 73 or 74)
Remove the misfed paper.
(See P .79 – 92)
Turn copier power switch off, then back on.
If error code comes back again, call
service.
Remove the punch dust.
(See P .77)
Call service.
I
93