ViewSonic VA1912w-2 Service Manual page 14

Do the following to adjust the display setting:
1. To display the Main Menu, press button [1].
NOTE: All OSD menus and adjustment screens disappear automatically after about 15 seconds. This is adjustable through the
OSD timeout setting in the setup menu.
2. To select a control you want to adjust, press
3. After the control is selected, press button [2]. A control screen like the one shown below appears.
4. To adjust the setting, press the up
5.To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display:
• Adjust the computer's graphics card so that it outputs a 1440 x 900 @ 60Hz video signal to the LCD display. (Look for
instructions on "changing the refresh rate" in the graphics card's user guide.)
• If necessary, make small adjustments using H. POSITION and V. POSITION until the screen image is completely visible.
(The black border around the edge of the screen should barely touch the illuminated "active area" of the LCD display.)
ViewSonic Corporation
or to scroll up or down the Main Menu.
The command line at the bottom of the control screen tells what to
do next from this screen. You can toggle between control screens,
adjust the selected option, or exit the screen.
or down buttons.
11
Confidential - Do Not Copy VA1912w-2_VA1912wb-2