SyncMaster 710T / 910T / 711T / 912T / 701T(Option)
(The configuration at the back of the monitor may vary from product to product.)
1. Power port
2. DVI port
3. D-sub 15-pin port
4. Power on/off Switch
(option)
See
Connecting Your Monitor
Connect the power cord for your monitor to the power port on the back
of the monitor.
Connect the DVI Cable to the DVI Port on the back of your Monitor.
Connect the signal cable to the 15-pin, D-sub connector on the back
of your monitor.
Use this button for turn the monitor on and off.
for further information regarding cable connections.