Page 1
LCD TV LA26R51B LA32R51B - AFTER SALES SERVICE LA40R51B - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present. Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference.
Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. • Digital Ready TV: When you Although digital broadcasting must be in the select the regular screen (4:3) wide screen (16:9) HD format, broadcasters mode to watch an SD-grade sometimes show programs made originally digital broadcast (and the set-top...
Page 3
• Integrated Digital TV Although digital broadcasting must be in the (Wide-screen): When the TV wide screen (16:9) HD format, broadcasters receives SD-grade (regular) sometimes show programs made originally broadcasting signals (receives in the regular screen format (4:3) by 480p regular signals). converting the signals into digital form, in which case the left and right side edges of •...
Contents ONNECTING AND REPARING Viewing the Control Panel ..................4 Viewing the Connection Panel................... 5 - Connecting an Aerial or Cable Television Network ..........6 - Connecting External A/V Devices ................6 - SERVICE ........................ 6 - Connecting Component Devices (DTV/DVD) ............6 - Connecting HDMI/DVI ....................
Page 5
Using Fastext to Select a Teletext Page ............54 ECOMMENDATIONS Troubleshooting: Before Contacting Service Personnel ........55 Installing the Wall Mount Kit (LA26R51B) ............56 Installing the Wall Mount Kit (LA32R51B, LA40R51B) ........58 Installing the Stand (LA26R51B, LA32R51B) ............ 60 Using the Anti-Theft Kensington Lock ..............
Viewing the Control Panel SOURCE (Power) Press to turn the TV on and off. Displays a menu of all of the available input sources (TV, AV1, AV2, S-Video, Component1, Power Indicator Component2, PC, HDMI). You can also use the SOURCE button on Blinks and turns off when the power is on and the TV’s control panel to make selections.
Viewing the Connection Panel Power Input Whenever you connect an audio or video system to your set, ensure that all elements are switched off. English-5...
Viewing the Connection Panel Connecting an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial - A cable television network - A satellite network Connecting External A/V Devices - Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.
Viewing the Remote Control (All Functions Except Teletext) Television Standby button (Refer to page 11) Picture-In-Picture On / Off (Refer to pages 31-32) Picture freeze Automatic Power-off (Refer to page 25) (Refer to page 41) Number buttons for direct channel access DNIe Demo On/Off Previous channel (Refer to page 27)
Viewing the Remote Control (Teletext Functions) Teletext display/mix both teletext information and the normal broadcast Teletext sub page Teletext cancel Teletext hold : Teletext next page : Teletext previous page Teletext mode selection (LIST/FLOF) Exit from the teletext display Teletext reveal Teletext index Teletext size selection Teletext store...
Installing Batteries in the Remote Control Slide the cover out completely. Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time.
Switching On and Off The mains lead is attached to the rear of your set. Plug the mains lead into an appropriate socket. Result: The standby indicator lights up on the front panel. The main voltage is indicated on the rear of your set and the frequency is 50 or 60Hz.
Becoming Familiar with the Remote Control The remote control is used mainly to: Change channels and adjust the volume. Set up your set using the on-screen menu system. The following table presents the most frequently used buttons and their functions. Button Viewing Function Menu Function...
Plug and Play When the set is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. If the set is in standby mode, press the POWER button on the remote control. Result: The message Start Plug & Play is displayed. It appears for a little while, and then the Language menu is automatically displayed.
Plug and Play If you want to reset this feature... This function does not work in PC mode. Press the MENU button. Result: The main menu is displayed. Press the button to select Setup. Press the ENTER button. Result: The options available in the Setup group are displayed. The Plug &...
Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
Storing Channels Manually You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify.
Page 19
Storing Channels Manually If you know the number of the channel to be stored, Press the button to select Channel and then press the ENTER button. Select C (Air channel) or S (Cable channel) by pressing the button. Press the button to select channel.
Editing the Channels You can exclude the channels you chose from the channels you scanned. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning.
Sorting the Stored Channels You can exchange the numbers of two channels, in order to: Modify the numeric order in which the channels have been automatically stored. Give easily remembered numbers to the channels that you watch most often. Press the MENU button.
Assigning Channels Names Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. Press the MENU button. Result: The main menu is displayed. Press the button to select Channel. Press the ENTER button.
Fine Tuning Channel Reception If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If, however, the signal is weak or distorted, you may have to fine-tune the channel manually.
Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. Press the MENU button. Result: The main menu is displayed. Press the button to select Picture. Result: The options available in the Picture group are displayed.
Adjusting the Custom Picture Your set has several settings which allow you to control picture quality. Press the MENU button. Result: The main menu is displayed. Press the button to select Picture. Result: The options available in the Picture group are displayed.
Changing the Colour Tone You can select the most comfortable colour tone to your eye. Press the MENU button. Result: The main menu is displayed. Press the button to select Picture. Result: The options available in the Picture group are displayed.
Changing the Picture Size You can select the picture size which best corresponds to your viewing requirements. Press the MENU button. Result: The main menu is displayed. Press the button to select Picture. Result: The options available in the Picture group are displayed.
Using the Digital NR (Digital Noise Reduction) Feature If the signal received by your television is weak, you can activate this feature to help reduce any static and ghosting that may appear on the screen. Press the MENU button. Result: The main menu is displayed.
DNIe (Digital Natural Image engine) Samsung’s new technology brings you more detailed images with contrast and white enhancement. A new image compensation algorithm gives viewers brighter and clearer images. DNIe technology will match every signal to your eyes. You can see how DNIe improves the picture by setting DNIe Demo mode to On.
My Colour Control My Colour Control is to adust the most preferred colours such as Blue, Green, Pink without interfering with other colours in order for each consumer to enjoy the screen colour of its choice. Press the MENU button. Result: The main menu is displayed.
Dynamic Contrast Dynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create optimum contrast. Press the MENU button. Result: The main menu is displayed. Press the button to select Picture. Result: The options available in the Picture group are displayed.
Brightness Sensor Brightness Sensor is to adjust brightness of screen either automatically or manually by detecting brightness of surrounding environment using light detecting sensor. Press the MENU button. Result: The main menu is displayed. Press the button to select Picture. Result: The options available in the Picture group are displayed.
Viewing the Picture In Picture (PIP) You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture.
Page 34
Viewing the Picture In Picture (PIP) Press the button to select Position and then press the ENTER button. Select the position of the sub picture by pressing the button and then press the ENTER button. Result: You can move the sub picture. When the size of the sub picture is set to [PC/HDMI] , this feature does not work.
Adjusting the Volume You can adjust the volume using your remote control. Press the button to increase the volume. Result: A horizontal bar is displayed and the volume increases until you release the button. The cursor moves to the right to indicate the volume.
Switching the Sound Off Temporarily You can switch the sound off temporarily. Example: You wish to answer the telephone. Press the MUTE button. Result: The sound is switched off and “Mute” is displayed. When you wish to turn the sound back on, press the MUTE button again or either of the volume buttons.
Changing the Sound Standard You can select the type of the special sound effect to be used when watching a given broadcast. Press the MENU button. Result: The main menu is displayed. Press the button to select Sound. Result: The options available in the Sound group are displayed. Press the ENTER button.
Setting the TruSurround XT (SRS TSXT) TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers.
Adjusting the Volume Automatically Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Connecting Headphones You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room. Plug a set of headphones into the 3.5mm mini-jack socket on the rear panel of the set.
Listening to the Sound of the Sub Picture During the PIP feature is activating, you can listen to the sound of the sub picture. Press the MENU button. Result: The main menu is displayed. Press the button to select Sound. Result: The options available in the Sound group are displayed.
Setting and Displaying the Current Time You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers. If you disconnect the power cord, you have to set the clock again.
Setting the Sleep Timer You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode. Press the MENU button. Result: The main menu is displayed. Press the button to select Setup. Press the ENTER button.
Switching the Television On and Off Automatically You can set the On/Off timers so that the set will: Switch on automatically and tune to the channel of your choice at the time you select. Switch off automatically at the time you select. The first step is to set the television’s clock (refer to “Setting and Displaying the Current Time”...
Activating the Child Lock This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio. Child Lock cannot be released using the buttons on the lower-right side panel. Only the remote control can release the Child Lock setting, so keep the remote control away from children.
Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off". Press the MENU button.
Selecting a Device from External Sources Your set enables you to choose which audio/video signals are output to the external connector. Press the MENU button. Press the ENTER button to select Input. Result: The options available in the Input group are displayed. Press the ENTER button.
Viewing Pictures from External Sources Once you have connected up your various audio and video systems, you can view the different sources by selecting the appropriate input. Check that all the necessary connections have been made. Press the SOURCE button. Result: The edited device and audio status are displayed on top- left of the set.
But even if your actual screen look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) First, click on “Control Panel” on the Windows start menu.
Adjusting the PC Screen Automatically Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position are adjusted automatically. Press the PC button on the remote control to select the PC mode. Press the MENU button.
Coarse and Fine Tuning of the Image The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.
Changing the Image Position Press the PC button on the remote control to select the PC mode. Press the MENU button. Result: The main menu is displayed. Press the button to select Setup. Press the ENTER button. Result: The options available in the Setup group are displayed. Press the button to select PC.
Initializing the Image Settings You can replace all image settings with the factory default values. Press the PC button on the remote control to select the PC mode. Press the MENU button. Result: The main menu is displayed. Press the button to select Setup.
Teletext Decoder Most set channels carry “ teletext ”, pages of written information that provide information such as: Television programme times. News bulletins and Weather forecasts. Sports results. Subtitles for the hard of hearing. The teletext pages are organized according to six categories: Part Contents Selected page number.
Selecting a Specific Teletext Page Press the number buttons on the remote control to enter the page number directly: Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons. Result: The current page counter is incremented and the page is then displayed.
Using Fastext to Select a Teletext Page The various topics included in the teletext pages are colour-coded, and can be selected by pressing the coloured buttons on the remote control. Display the teletext contents page by pressing the TTX/MIX ( ) button.
Troubleshooting: Before Contacting Service Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of your set and contact your local dealer. No sound or picture Check that the mains lead has been connected to a wall socket.
Installing the Wall Mount Kit (LA26R51B) This installation is to be used when attaching the wall mount to a concrete wall. When attaching to other building materials, please contact your nearest dealer. Components (Sold separately) M4 X L15 Wall-Bracket Set-Bracket...
Page 59
Installing the Wall Mount Kit (LA26R51B) How to assemble the Wall Mount Bracket Turn the power off and unplug the power cord from the outlet. Place the TV faced down on a soft cloth or cushion on a table. Remove the four screws from the back of the TV.
Installing the Wall Mount Kit (LA32R51B, LA40R51B) This installation is to be used when attaching the wall mount to a concrete wall. When attaching to other building materials, please contact your nearest dealer. Components (Sold separately) M6 X L14 Wall-Bracket Set-Bracket Screw: 8EA M4 X L25...
Page 61
Installing the Wall Mount Kit (LA32R51B, LA40R51B) How to assemble the Wall Mount Bracket Turn the power off and unplug the power cord from the outlet. Place the TV faced down on a soft cloth or cushion on a table. Remove the four screws from the back of the TV.
Installing the Stand (LA26R51B, LA32R51B) < 1 > < 2 > Lower the TV set in the direction of the arrow and fix the stand. Use the four screws to tightly fix the stand. English-60...
Figure 2 Figure 1 <Option> < LA32R51B > < LA26R51B / LA40R51B > Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2). Connect the Kensington lock cable.
Technical and Environmental Specifications Model Name LA26R51B LA32R51B LA40R51B Weight With stand 11.3 kg (24.91 lbs) 17.7 kg (39.02 lbs) 27.2 kg (59.96 lbs) Environmental Considerations Operating Temperature 10°C to 40°C (50°F to 104°F) 10°C to 40°C (50°F to 104°F) 10°C to 40°C (50°F to 104°F)
Pin Configurations PC Input Connector (15Pin) Signal Signal Red (R) Reserved Green (G) Sync Grounding Blue (B) Grounding Grounding Data (DDC) Grounding (DDC) Horizontal sync. Red (R) Grounding Vertical sync. Green (G) Grounding Clock (DDC) Blue (B) Grounding English-64...
Page 67
- AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present. ELECTRONICS...