Set The Final Spin Speed Or Select Rinse Hold; During The Washing Program - AEG ÖKO LAVAMAT 61300 Instruction Book

Operating Instructions

Set the Final Spin Speed or Select RINSE HOLD

If necessary change the spin speed for the final spin
0
or select RINSE HOLD: turn the selector knob to the
position required.
If RINSE HOLD is selected, the washing stays in the
final rinse water, it is not spun.
If you do not change the spin speed, the final spin
3
will be automatically adjusted to suit the washing program:
– COTTONS/LINEN
– EASY-CARES
– DELICATES
– WOOLLENS
The speed for the intermediate spin is dependent on the program
selected and cannot be changed.

During the Washing Program

Programm progress indicator
The program selector serves as a progress indicator by moving clockwise
until the end of the program is reached.
For the programs STAIN, MAIN WASH and QUICK WASH immediately
3
after the program has started the program selector moves to a position
directly behind QUICK WASH. Then it displays the program progress as
usual.
Alter settings
You can at any time
– alter the setting of the final spin speed,
– select RINSE HOLD,
– alter the temperature setting.
Other settings cannot be altered.
To interrupt the washing program prematurely:
1. Press the ON/OFF button.
0
2. Turn the program selector clockwise to PUMP OUT.
3. Press the ON/OFF button again.
Water is pumped out.
22
1100 revolutions per minute
1000 revolutions per minute
1000 revolutions per minute
1000 revolutions per minute