Makita BBC231U Instruction Manual page 16

housing. Keep the side with letters on the spool visible on
the top. Now, unhook the ends of the cord from their
temporary position and feed the cords through the
eyelets to come out of the housing.
3
010776
Align the protrusion on the underside of the cover with
the slots of the eyelets. Then push cover firmly onto the
housing to secure it. Make sure the latches fully spread in
the cover.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
1. Cover
1
2. Protrusion (Not
shown)
3. Slot of the eyelet
2
16